Instruction/ maintenance manual of the product P Sub 4 Piega
Go to page of 16
User Manual PIEGA P SUB 4 Active-Subwoofer V ersion 1.0.
“Music. That‘s really the only important issue when it comes to loudspeakers....“ 2 In our view , the superior loudspeaker is the one that does not interfere. One that adds no sound of its own. That accurately and naturally conveys what was played in the concert or recording studio.
4 Precautions Before unpacking... 5 Unpacking the P SUB 4 Instructions for unpacking... 6 Installation Instructions Recommendations for ideal positioning... 7 Connection Options Connection terminal for different applications... 8 Connecting the System Conguration examples for stereo and surround mode*.
PIEGA P SUB 4 Before unpacking... Precautions 4 Please read this user manual carefully and pay special attention to the following precautions and warnings. In your own interest, we advise you to strictly observe the following procedure when installing your new PIEGA P SUB 4.
Procedure: >Before unpacking, remove any jewelry such as watches, rings, bracelets etc. in order to avoid scratching the aluminum >Open the carton as shown in the gure and remove the supply cable and spikes provided.
Ideal setup: >For both surround and stereo mode, position the P SUB 4 as close to the two front loudspeakers as possible >The bass chassis of the P SUB 4 should face the front, with the connection terminal facing the wall >Only a small clearance from the wall is required (approx.
Its large range of connection options offers the P SUB 4 a large number of congurations both for stereo and for surround mode. Refer to the appropriate user manual supplied for specic information on the loudspeakers used and components of your stereo or surround system.
8 This connection conguration for 5.1 surround applications uses an A V receiver with a separate subwoofer output. Since the A V receiver handles the bass management in this conguration, the settings for each loudspeaker can be adjusted individually via the menu.
Connecting the System PIEGA P SUB 4 Conguration example for stereo and surround mode Dolby Digital System - Surround System with NF Out The 5.1 receivers and power ampliers of some manufacturers have a separate NF Out socket for connecting a subwoofer .
10 The power ampliers of some manufacturers feature separate MAIN IN and PRE OUT terminals, allowing the preamplied signal to reach the subwoofer and to be looped back again ltered. In this way the loudspeakers are relieved in the deep range, thus gaining in precision and sound characteristics (see page 13).
1 1 This is a widely used conguration for stereo mode, although it is not recommended for surround mode since there is a risk of overloading with small satellite loudspeakers.
12 PIEGA P SUB 4 Conguration example for stereo mode Loudspeaker terminals on the subwoofer Commonly used conguration in stereo mode with the loudspeakers (parallel) connected to the subwoofer . Refer to the appropriate manual for information about operation and connection options for your stereo amplier .
13 Thanks to the use of the most advanced active electronics, your new P SUB 4 is a cutting edge product in the eld of subwoofers. The connection and setting options provided on the P SUB 4 allow the best possible connection to your stereo or surround sound system and can be adapted to your individual audio requirements.
14 From development to production, right down to quality testing, PIEGA only uses materials and components of the highest quality . Y our new P SUB 4 has a polished aluminum surface. As this material is very sensitive, it should be treated with due care.
The warranty is limited to six years on our loudspeakers and three years on our electronics in accordance with the conditions stated below . Read through the service and warranty conditions carefully , especially the warnings concerning the purchase of PIEGA loudspeakers from unauthorized dealers.
CONFORMS T O UL STD. 6500 CERTIFIED TO CAN/CSA STD. E60065 © Copyright 2004 by PIEGA SA, Switzerland Design by Piega - All rights reserved v1.0 041213 Subject to modication, in particular technical modications All specications without guarantee PIEGA SA Bahnhofstrasse 29 CH-8810 Horgen, Switzerland T el.
An important point after buying a device Piega P Sub 4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Piega P Sub 4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Piega P Sub 4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Piega P Sub 4 you will learn all the available features of the product, as well as information on its operation. The information that you get Piega P Sub 4 will certainly help you make a decision on the purchase.
If you already are a holder of Piega P Sub 4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Piega P Sub 4.
However, one of the most important roles played by the user manual is to help in solving problems with Piega P Sub 4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Piega P Sub 4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
