Instruction/ maintenance manual of the product pm1400 Phoenix Gold
Go to page of 18
DECLARATION OF CONFORMITY We CARVER PROFESSIONAL INTERNATIONAL (supplier’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm1400 (nam.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL T.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL T.
3 Continuous Average Output Power, both channels driven: 475 watts per channel into 8 ohms from 20Hz to 20kHz, with no more than 0.1% THD; 700 watts per channel into 4 ohms at 1kHz, with no more than 0.1% THD Bridged-mono operation: 1400 watts into 8 ohms at 1kHz, with no mor e than 0.
3 Continuous Average Output Power, both channels driven: 475 watts per channel into 8 ohms from 20Hz to 20kHz, with no more than 0.1% THD; 700 watts per channel into 4 ohms at 1kHz, with no more than 0.1% THD Bridged-mono operation: 1400 watts into 8 ohms at 1kHz, with no mor e than 0.
6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation.
6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation.
AC Power Considerations Ensure that the pm1400 is plugged into an outlet capable of supplying the correct voltage specified for your model and enough current to allow full-power operation of all the amplifiers plugged into it.
AC Power Considerations Ensure that the pm1400 is plugged into an outlet capable of supplying the correct voltage specified for your model and enough current to allow full-power operation of all the amplifiers plugged into it.
9 70V Distribution Systems The pm1400 has sufficient output voltage capability in stereo mode to drive 70-volt distribution systems without using a step-up transformer at the amplifier. In this configuration, the pm1400 delivers up to 475 watts per channel to the 70-volt system, depending on the impedance of the total system.
9 70V Distribution Systems The pm1400 has sufficient output voltage capability in stereo mode to drive 70-volt distribution systems without using a step-up transformer at the amplifier. In this configuration, the pm1400 delivers up to 475 watts per channel to the 70-volt system, depending on the impedance of the total system.
Oper a ting Tips Using the pm1400 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Oper a ting Tips Using the pm1400 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
13 Figure 9 Input Polarity The XLR input connectors on the pm1400 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
13 Figure 9 Input Polarity The XLR input connectors on the pm1400 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
W arranty Informa tion Professional Power Amplifiers: 5 years NOTE: The following warranty is exclusive to the United States and its possessions and territories. Please see your Carver Professional dealer or distributor for the correct warranty information in your area or locale.
W arranty Informa tion Professional Power Amplifiers: 5 years NOTE: The following warranty is exclusive to the United States and its possessions and territories. Please see your Carver Professional dealer or distributor for the correct warranty information in your area or locale.
DECLARATION OF CONFORMITY We CARVER PROFESSIONAL INTERNATIONAL (supplier’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm1400 (nam.
An important point after buying a device Phoenix Gold pm1400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Phoenix Gold pm1400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Phoenix Gold pm1400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Phoenix Gold pm1400 you will learn all the available features of the product, as well as information on its operation. The information that you get Phoenix Gold pm1400 will certainly help you make a decision on the purchase.
If you already are a holder of Phoenix Gold pm1400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Phoenix Gold pm1400.
However, one of the most important roles played by the user manual is to help in solving problems with Phoenix Gold pm1400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Phoenix Gold pm1400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
