Instruction/ maintenance manual of the product MVXA-2008 Atlas
Go to page of 8
.75 2.25 9.5 .75 1 3 2 45 12345 Volume Control Channel Select Control Channel Visual Indicator LED's Phone Plug (3 Watts Unbuffered) S + - +- + Speaker Out (3 Watts) Line Out Power 15 VAC -2 -5 -.
MVXA Series Multi-Channel Amplified Monitor Panel Users Manual MVXA-2008 MVXA-2016 Accurate speaker and line level monitoring in a single rac k unit! • 8 or 16-channel audible and visual monitoring .
Isolation Both MVXA models feature Atlas-Soundolier's exclusive CerAmp TM technology (patent pending) to isolate noise from the input channels. Our CerAmp TM design utilizes ceramic capacitors and an op-amp to achieve high input impedance isolation without transformers to reduce distortion , hum, and noise.
❷ Rack mount (if desired). Assure proper "Earth Ground"- see paragraph Shields and Grounding located in Back Panel V iew for detailed information. ❸ Connect each piece of equipment to be monitored to a separate & input terminal (channel 1-8 or 1-16).
Internal Speaker The internal speaker provides built-in audio monitoring capability . It may be used in conjunction with other monitoring methods or bypassed (see examples). Examples: 1. Headphones may be used to monitor the audio signal. When headphones are connected to the mini headphone jack; the internal speaker is bypassed.
Stereo Monitoring Visual monitoring of stereo signals may be accomplished by simply connecting left and right signal connections to separate channels (ex: left to channel 1, right to channel 2).
MVXA Series Back Panel V iew (Rear Panel Cover Removed) Lacing Rail The MVXA's bottom panel includes many wire management features. Holes are located along the back of the panel for tie wrapping. These holes are spaced 2" apart to allow the use of readily available hardware handles or lacing bars.
Jumper s Jumpers are to be adjusted prior to applying power to the MVXA monitor panel. Jumpers have an extended tab for ease of placement. Always put the jumpers on the same numbers. EX: 1 & 2, 3 & 4, or 4 & 5. No jumpers are used for the 100 volt input setting.
An important point after buying a device Atlas MVXA-2008 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlas MVXA-2008 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlas MVXA-2008 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlas MVXA-2008 you will learn all the available features of the product, as well as information on its operation. The information that you get Atlas MVXA-2008 will certainly help you make a decision on the purchase.
If you already are a holder of Atlas MVXA-2008, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlas MVXA-2008.
However, one of the most important roles played by the user manual is to help in solving problems with Atlas MVXA-2008. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlas MVXA-2008 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
