Instruction/ maintenance manual of the product 447299 Atlas
Go to page of 12
Atlas #544099 and #447399 DCC Decoders 1 Atlas Model Rai lroad Co., Inc. The Atlas #544099 and #447399 DCC Decoders are factory-installed in Atlas N scale DCC-equipped SD-24 and SD-26 locomotives. The #544099 decoder is used in locomotives with high hoods; w hile the #447399 decoder is used in locomotives w ith low hoo ds.
Atlas #544099 and #447399 DCC Decoders 2 Atlas Model Rai lroad Co., Inc. NMRA DCC Standards and Recommended Practices. T hey have been augmented to work w ell w ith all major DCC systems on the market.
Atlas #544099 and #447399 DCC Decoders 3 Atlas Model Rai lroad Co., Inc. internal s afeguards t o prevent damage, you must not allow any metal part of the locomotive to touch surface components of the decoder other than the pickup pads on the decoder that connect to the wheel-sets, the headlights, and the motor brushes.
Atlas #544099 and #447399 DCC Decoders 4 Atlas Model Rai lroad Co., Inc. unwanted shorts, There must be NO electrical contact betw een the motor contacts and any part of the frame Place the locomotive (without its plastic body) on your DCC programming track and read back the locomotive's address from the decoder.
Atlas #544099 and #447399 DCC Decoders 5 Atlas Model Rai lroad Co., Inc. your DCC system are specified in the user manual of the particular system that are using. Note: In order for newly programmed CV v alues to take effect aft er service mode programming, the decoder m ust go through a power reset.
Atlas #544099 and #447399 DCC Decoders 6 Atlas Model Rai lroad Co., Inc. CV Reg. Description Range Default Value ** 7 7 Version Number: This location s tores the version nu mber of the decoder. This CV i s read-only. - 46 8 8 Manufacturers Identification: 1 This value is the manufacturer ID of the de coder, (Atlas=127).
Atlas #544099 and #447399 DCC Decoders 7 Atlas Model Rai lroad Co., Inc. CV Description Range Default Value ** 29 Bit 1 Headlight mode: 0 = Operation with 14 or 27 spe ed-step systems. This setti ng is selected when the locomotive dec oder is used with any DCC system that does not sup port the 28 speed- step mode.
Atlas #544099 and #447399 DCC Decoders 8 Atlas Model Rai lroad Co., Inc. CV Description Range Default Value ** 51 DCC Function Used to Dim Headlights The active headli ght (front headlight if l ocomot.
Atlas #544099 and #447399 DCC Decoders 9 Atlas Model Rai lroad Co., Inc. Converting the Binary Values of Indivi dual Bits within a Configuration Vari able into an Equivalent Dec imal Value f or the En.
Atlas #544099 and #447399 DCC Decoders 10 Atlas Model Rai lroad Co., Inc. Example : Calculating the Default Value for CV29 Bit Number Decimal Equivalent Decimal Values for CV Calculation 0 1 1 2 2 2 4.
Atlas #544099 and #447399 DCC Decoders 11 Atlas Model Rai lroad Co., Inc. Troubleshooting Decoder Program ming Problems Fault Cause and Solution Locomotive does not move when you address it on DCC system. Check to see if you hav e selected the co rrect address for that locomotive.
Atlas #544099 and #447399 DCC Decoders 12 Atlas Model Rai lroad Co., Inc. Atlas Limited O ne-Year DCC Decoder Warrant y Please fill out and mail the Warranty car d on the reverse side, within 30 days of purchas e.
An important point after buying a device Atlas 447299 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlas 447299 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlas 447299 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlas 447299 you will learn all the available features of the product, as well as information on its operation. The information that you get Atlas 447299 will certainly help you make a decision on the purchase.
If you already are a holder of Atlas 447299, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlas 447299.
However, one of the most important roles played by the user manual is to help in solving problems with Atlas 447299. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlas 447299 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
