Instruction/ maintenance manual of the product A02-IPCAM3_ME01 Atlantis Land
Go to page of 79
Where solution s beg in ISO 9001:200 0 Certifi ed Company NetCamera NV IP Security Night Vision Camera A02-IPCAM3 MANUAL A02-IPCAM3_ME01.
.
Net Camera NV ITALI ANO Questo prodotto è coper to da garanzi a Atlantis Land Fast-S wap della durata di 3 anni. Per maggiori dettagli in meri to o per accedere alla docu mentazione comple ta in Italiano fare riferi mento al sito www .atlantis- lan d.
Net Camera NV The award of the i nformation is facultative, but its lack will preven t ATLANTIS LA ND® from starti ng the Guarantee pro cess r equested. Copy right The Atlantis Land logo i s a registered trad emark of Atlantis Land S .p.A. All other names men tioned mat be trade marks or registered trademarks o f their r especti ve owners.
NetCamera NV INDEX Chapter 1 ...................................................................................................... 9 1.1 An Overview of NetCamera NV .............................................................. 9 1.2 System Requirements .
NetCamera NV 4.2.1 FTP ......................................................................................... 42 4.2.2 Mail .......................................................................................... 44 4.2.3 GPIO ...................
NetCamera NV Copyright Statem ent No part of this p ublication may be reproduced, stor ed in a retrieval system, or transmitted in an y form or by a ny means, whether electronic, mechani cal, photocopying , recording or otherwi se wit hout the prior writi ng of the publishe r.
NetCamera NV CE Mark Warni ng This is a Clas s B product. In a domesti c en viron ment, this product ma y cause radio interference , in which ca se the user ma y be re quired to take a dequate measures.
NetCamera NV Chapter 1 Introduction This manual is thin k for an ad vanced utilizati on of Ne tCamera NV; for this r eason, you can find e xplanation of a ny fun ctions suppor ted by product. For fa st configuration , please re feree to Quick Star t Guide .
NetCamera NV Local Area Network: 10 Base-T Etherne t or 100Base TX Fa st Ethernet CPU: Intel Celeron 1.5GHz or above (Intel Pentium 4 is preferred ) Memory S ize: 128 MB (256 MB re commended) VGA card resolu tion: 8 00x600 or abo ve Internet E xplorer 5.
NetCamera NV Chapter 2 Using NetCa mera NV 2.1 Cautions for NetCamera NV Read thi s section to learn how to set u p your IP came ra and u se its ba sic fun ctions. Do not place the NetCa mera NV under high humidi ty and high temperature . It can damage the devi ce.
NetCamera NV 2.2 The Front LEDs LED Mea ning Power Lights when power ON Lan Network acti vity ind icator Flashes when sending/re ceiving data.
NetCamera NV Night Vi sion Furthermore, tha nks its 8 integrated Infrared sensors, the NetCamer a NV’s auto matic Da y/Night functionality will cha nge to In frared mode as i t become s dark Light S.
NetCamera NV 2.3 The Re ar Ports Port Mea ning Network Ca ble Ethernet por t with 10/100 Mbps Fa st Ethernet connections, con nect this por t to swi tch/hub GPIO Connector s Its back panel contain s 3.
NetCamera NV DC-IN Connect the Power Adapte r DC plug to the AP’s power jack Please check the at tached pi rcture in o rder to obtain more info abou t GPIO port.
NetCamera NV 2.4 Assem bling the Stand a nd Connecting to a Netw ork The camera can be assembled in two different ways; either fro m the top o f the uni t or t he bott om.
NetCamera NV The IP ca mera ca n be conne cted to an E thernet ne twork using the RJ-45 port as shown. Conne ct the ca mera to an Eth ernet hub or switch using a standard cable. You can also conne ct the camera directl y to a computer using the supplied cable.
NetCamera NV Chapter 3 Config uratio n The NetCamera NV can be configure d with your Web browser. The web browser i s included a s a standard appl ication in the following o peration syste ms, UNIX, Linux, Mac OS, Windows 95/98 /NT/2000/Me, and etc. The prod uct provide s a very easy and user-friendly in terface for configuration.
NetCamera NV 3.1.1 Windows 95/98/ME 1. Go to Star t / Setti ngs / Co ntrol Pa nel . In the Con trol Panel, double-click on Network and choo se the Configur ation tab. 2. Select TCP / IP -> NE2000 Compatible , or the na me of an y Network Inter face Car d (NIC ) in your PC.
NetCamera NV 3.1.4 Windows XP 1. Go to Start / Co ntrol Pane l (in Clas sic View). In t he Control Panel , double-click on Netw ork Con necti ons. 2. Double-cli ck Local Area Conn ection 3. In the LAN Area Connection Statu s window, click Properti es.
NetCamera NV 3.3 Browser configuration Open the web bro wser, enter the lo cal port IP address of thi s NetCamera NV , which default a t 192.168.1.1 , and click “ Go ” to get the login page.
NetCamera NV Please re fer to the appendix on ho w to install Acti veX. • At the top click This site might requ ire the follow ing ActiveX Control: ´AT L3. 0:VC View ´ from ´Atlantis Land SpA ´ . Click here to instal l... . • Click Install Act iveX Control.
NetCamera NV For more de tailed instruction s on configuring and usingthe Ne tCamera NV , please refer to the online manual. The computer’s IP address must correspond with the camera’s IP addr ess in the same segment fo r the two devices to co mmunicate (E.
NetCamera NV Chapter 4 Advanced Configura tion Read this chapter to learn how to ope rate the IP camera and take advanta ge of the advanced features such as alerting, and ftp transfer s. Open the web bro wser, enter the lo cal port IP address of thi s NetCamera NV , which default a t http ://192.
NetCamera NV To access the setti ngs menus, do the follo wing: Click the bu tton on the menu sidebar. A login promp t appears: The computer’s IP address mu st correspond with the camera’s IP address in the same segment for the two de vices to comm unicate .
NetCamera NV There are 3 sub menus in the men u sidebar: Home , Basic Setting and Advanced Setting. Home Pa g e Basic Settin g s Advanced Sett in g s.
NetCamera NV 4.1 Basic Settings Read this section to learn about all the se ttings and options under the Basi c Setting sub menu. There are five main screen s, access ed via the tabs at th e top of the screen: • System • Network • User • Video • Monitor 4.
NetCamera NV Config uration Clic k the Configuration tab to access the configura tion status screen : Here is displa yed all syste m informa tion, including firmwar e ver-sion and de vice na me, and is wher e you can confi gure date and time option s.
NetCamera NV If You meet pro blems, please follow these instru ctions: NTP Se rver = pool.ntp .org or 128.138 .140.44 NTP Serve r=192.5.41.40 Click the Submi t butto n to save your settings and to update the syste m date an d time.
NetCamera NV Firmw are Clic k the Firmware tab to ac cess th e fi rmware upgrad e screen: Here you can upgrade the syste m firmware version. Click the Sfoglia(Brows e) button an d locate th e folder where the fir mwar e update is stored. Click the Upgrad e button to u pgrade the firmwar e.
NetCamera NV Please pay a ttention. In case el e ctrical shutdo wn, d uring this procedure, this product could be not usable. When uploading so ftware to theNe tCamera NV, it is i mportan t not to interrupt the Web browser b y closing the window or lo ading a new page.
NetCamera NV Others Here you can reset and restore original camer a setting s. Click the Restore to Factory Default button to rese t all parameter s to origi nal factory settings .
NetCamera NV 4.1.2 Network The Network subm enu allows you to configure all system-related setting s. There are 3 main screen s, acce ssed via the ta bs a t the top of th e screen: • Ethenet • PPP.
NetCamera NV Ethernet Clic k the Eth ernet tab to acc ess the ethernet settings screen: Here you can configure all settings rela ted to your Ethernet and DNS & HTTP port setup. Under IP Settin g and DNS Con figurati on , ei ther enter th e settin gs ma nually or se lect the DHCP radio button to obtain the addresse s via DHCP.
NetCamera NV PPPoE Clic k the PPPo E tab to access the PPPoE se ttings screen: Here you can confi gure all PPPoE co nnection se ttings.If you connect to you r network via PPPoE, check the Ena ble PPPoE che ckbox and en ter your User Name, password and MTU.
NetCamera NV Dynamic DNS clie nt can works cor rectl y only if PPPoE is activa ted..
NetCamera NV DDNS Clic k the DDNS tab to ac cess th e DDNS sett ings screen: Here you can confi gure al l DDNS connection se ttings. Go to www.dyndn s.org to regi ster a domain name and obtain a user name and password. Enter this dom ain name, username, and pass word in the DDNS settings screen.
NetCamera NV 4.1.3 User The User submenu enables you to set up user s and administra-tors for the syste m. Under User Authorization , check E nable User Check if you wi sh to run a login process ever y time you acce ss the system. Click t he Submit button to co nfirm this setting.
NetCamera NV 4.1.4 Video The Video submen u enables you to configure all video setting s: Under Profile & Options , you can alter various o ptions: • Camera Location: Enter the camera l ocation. Click the Submit button to confirm thi s setting .
NetCamera NV • Frame R ate: Enter the required fra me rate. Cli ck the Submit button to confirm thi s setting . Under Ima ge Para meters , you can alter i mage output op tions. Select the image co mpression rate , and resolu tion you require fro m the dropdown boxes.
NetCamera NV 4.1.5 Monitor The 4-port monitor setting scre en appears: Enter the IP addre ss, port, login and passwo rd of each camera you wish to view and chec k the Enabl e checkbox.
NetCamera NV 4.2 Advanced The camera will fu nction fine after the Basic config uration, howe ver, you may wish to explore more advanced option s. This se ction explains each para meter and setting procedures for advanced configura tion of the camera.
NetCamera NV All uploade files on FTP are in .j pg form at..
NetCamera NV 4.2.2 Mail The Mai l submenu enables you to configure all mail serve r se t-ting s: When mail alerting is enabled, the camera sends a still image to a specified email address every ti me the alert is triggered (see “ Bre ach Ma na ger ” for detail s o n how to activa te thi s opti on).
NetCamera NV.
NetCamera NV 4.2.3 GPIO The GPIO submenu enable s you to co nfigure all DI se nsor and DO se ttings: External DI sensors can be attache d via the GPIO port at the rear of the camera . The external sensor ca n be normally open , or normall y close d. A normall y open sen sor is like an open switch that clo ses whe n trigger ed.
NetCamera NV 4.2.4 TCP Message The Tcp Message submenu enable s you to con figure all tcp message se ttings: Enter the Server IP address, port and message subj ect.
NetCamera NV 4.2.5 Breach Manager The Brea ch Ma nage r submenu enab les you to configur e all breach aler t and motion det ect ion s etti ngs: You can configure the syste m to capture im ages whe n either the motion se nsors, DI1 or DI2 sensors are acti vated .
NetCamera NV The Status win dow lists all configured alert d etails; th e first colu mn lists the alar m trigger type , the se cond lists the actio n type , and the third displa ys whether the alert is enabled or di sabled.
NetCamera NV Chapter 5 Support 5.1 Suppor t If you have any pr oblems wi th the IP Night Vision Ca mera, please consult thi s manual. If you ha ve any oth er questions you can cont act the Atlantis Land co mpany directly at the following address: Atlant is La nd S pA Viale De Gasperi, 122 20017 Mazzo di Rho(MI) Tel: +39.
NetCamera NV APPENDIX A: Frequently Asked Questions A.1 Usin g LE Ds t o Dia gnose P roble ms The LEDs are useful aide s for finding possible proble m causes.
NetCamera NV A.2 WE B I cannot acce ss the web con figurator. Steps CORRECTI VE ACTION 1 Make sure you a re using the corr ect IP addres s of the NetCamera NV . Check the IP address of the NetCa mera NV (192.168.1 .1). The we b configura tor does not displa y properly.
NetCamera NV A.4 Ge neral Q uestions Question What is an IP Security Night Vis ion Came ra? Answer The IP Security Ni ght Vision Ca mera is a stand alone system connecti ng directly to an Etherne t or Fast E thernet netwo rk.
NetCamera NV Question What networ k cabling is requir ed for the IP Securi ty Night Vision Camera? Answer The IP Security Ni ght Vision Camer a uses Categor y 5 UTP cable allo wing 10 B ase-T and 1 00 Base-T networ king.
NetCamera NV APPENDIX B : Trouble Shoo ting This chapter covers potential proble ms and the correspo nding remedies . Question I cannot access t he IP Security Night Vision Camera from a web browser. Answer The possible cause might be the IP Ad dress for the IP Securi ty Night Visio n Camera is already bei ng used by another de vice.
NetCamera NV Address of the IP Security Nigh t Vision Cam era is withi n the same subnet as your wor kstation. Click “Start”, “Settin g”, “Contro l Panel”, and the “Networ k” icon. Select TCP /IP from the “Ne twork” dial og box and from the “TCP/IP Prope rties” dialog box click “Speci fy an IP add ress”.
NetCamera NV Question Why does the Link LED n ot light up properl y? Answer • There might be a problem with the n etwork cable. To confir m that the cable s are wor king, PING the address of a know devi ce on the ne twork.
NetCamera NV Question There is poor image quali ty, how can I improve the image? Answer • A probable cause might be the incorrect display properties con figuration for your desktop . You need to open the Disp lay Properties on yo ur desktop and con figure your displa y to sho w at least 65’000 color s for e xample a t least 1 6-bit.
NetCamera NV APPENDIX C: Adju sting the Ca mera Focus To help you get the be st image quality, keep in mind that while ad justi ng the NetCamera NV ( Adjust by turning clo ckw ise or counter-clockwi se )fo cus you can preview the image quality from your Web bro wser.
NetCamera NV APPENDIX D : GPIO Its back pane l contain s 3 pairs o f connectors (2 in put and 1 ou tput) all owing the camera to commu nicate with di fferen t elements of a building, such as elec tric doors and light swi tches or secur ity related d evices such as alarms.
NetCamera NV.
NetCamera NV A normally open se nsor (NO/CO M ) is like an open switch that close s when triggered . In this ca se the Motion Dete ction switch on a spot.
NetCamera NV For example, entr ance guarding (DO).
NetCamera NV For example, entr ance guarding (DO and DI).
NetCamera NV.
NetCamera NV APPENDIX E: G lossary of Terms NUMB ERS 10BASE-T 10BASE-T i s Ethernet o ver UTP Ca tegory III,IV, o r V unshielded twisted-pai r media. 100BASE-TX The two-pair twisted-media i mplementati on of 100BASE-T is called 100BASE- TX . 802.11g An IEEE standard for wireless l o cal area ne tworks.
NetCamera NV B BOOTP Bootstrap Protocol is an Interne t protocol that can auto matically configure a ne twork devi ce in a di s kless work station to give its own IP address. C Communication Communication has four components: sender , recei ver, message, and me dium.
NetCamera NV DNS Domain Name Syste m is an Intern et ser vice tha t tr anslates domain names into IP ad dresses. Since domain na mes are alphabetic, the y're easier to reme mber. The Interne t however, is really based on IP addresses every ti me you use a domain name the DNS will tra nslate the name i nto the correspon ding IP address.
NetCamera NV intranet pa ss through the fi rewall, which exa mines each message and blocks those th at do not me et th e specifie d security criteria .
NetCamera NV that identi fies it to the other node s. All Interne t addresse s are IP addresses IP Internet Pro tocol is the standard tha t describes the layout of the basic unit of in formation on the In ternet (the packe t ) and also details the n umerical a ddressin g fo rmat used to route the information.
NetCamera NV LAN Local Are a Networ k a computer ne twork that span s a relativel y small area sharing co mmon resour ces. Most LANs are confined to a single building or group o f buildings.
NetCamera NV specific IP address is accessible . It functio ns by sending a packet to the speci fied address and waits fo r a reply. It is pri marily used to troublesho ot Inte rnet connection s.
NetCamera NV Route r A router is the network so ftware or hardwar e entity char ged with routing pa ckets between ne tworks. S Server It is a simple computer that pro vid es resource s, such as file s or other informatio n. SMTP The Simple Mail Transfer Protocol is used for Internet mail .
NetCamera NV 2 or 10BASE-T networks to at tach devic es with AUI ports. U UDP The User Datagra m Protocol is a connectionless protocol th at resides abo ve IP in the TCP/ IP sui te ULP The upper-layer p rotocol refers to Application Layer protocol s such as FTP,SNMP , and SMT P.
NetCamera NV Workstation s Workstation refers to the intellige nt computer on the user’s desktop. Thi s computer may be an Intel-ba sed PC, a Macintosh, or a UNIX-based wor kstation.
NetCamera NV APPENDIX F : Technical Featur es TECHNICAL FEATUR ES CMOS Se nsor Number of e ffective pixels: 307200 pi xels (VGA) Resolution: 640 x 480 pi xel Lens Type: C3 Mou nt Lens (re movable) Focal length : f=3.
NetCamera NV System Re quirements Local Area Network: 10 Base-T Ethernet or 100Base TX Fa st Ethernet CPU: I ntel Celeron 1.5GHz or above (Intel Pentium 4 i s preferred) Memory Size : 128 MB (256 MB reco mmended) VGA card resolutio n: 800x6 00 or abo ve Internet E xplorer 5.
NetCamera NV.
Where solutions begin ISO 9001:200 0 Certifi ed Company Atlantis Land S. p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – It aly info@atlan tis-land.
An important point after buying a device Atlantis Land A02-IPCAM3_ME01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlantis Land A02-IPCAM3_ME01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlantis Land A02-IPCAM3_ME01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlantis Land A02-IPCAM3_ME01 you will learn all the available features of the product, as well as information on its operation. The information that you get Atlantis Land A02-IPCAM3_ME01 will certainly help you make a decision on the purchase.
If you already are a holder of Atlantis Land A02-IPCAM3_ME01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlantis Land A02-IPCAM3_ME01.
However, one of the most important roles played by the user manual is to help in solving problems with Atlantis Land A02-IPCAM3_ME01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlantis Land A02-IPCAM3_ME01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
