Instruction/ maintenance manual of the product Berkshire 800 ATL
Go to page of 20
A TL T elecom Limited reserves the right to make changes to this document at any time without notice. Power Rating Information – AC Plug T op Adapter Input 230V ~ 50 Hz, 50mA. Output 7.5V ~ 50 Hz, 300mA. A TL recommends only using the approved adapter supplied with this product (A TL Part Number 5/500/ X00/064).
Preparing to use the Berkshire 800 INITIAL CHECK Our telephones are checked, tested and leave us in perfect condition. If yours is damaged, please return it to your supplier with proof of purchase, for a replacement.
shows “ADV ANCED”. Press the “MENU/ENTER” key , then press the UP (5) or DOWN (6) key until the display shows “FIRST RING DISABLE”. FIRST RING D ISABLE Press the “MENU/ENTER” key again and the “FIRST RING DISABLE” setting will fl ash.
Once the call has been established, the display will appear as shown in the following example: HR : MI N DAY / MONT H 02920500700 00 - 02 - 36 CALL DUR ATION TIME NUM BER DIALED Making external calls from a Company exchange (P ABX) may require the number to be pre- fi xed by an access digit, normally a “9”.
will fl ash. Use the UP (5) or DOWN (6) key to toggle between “TBR” and “ELR”. RECALL TYP E : ELR ELR FLASHIN G Press the “MENU/ENTER” key to con fi rm the ELR setting. TBR PERIOD The TBR period is set to 100mS, but is selectable between 50mS and 600mS in steps of 50mS.
HR : MIN DAY / MONTH 02920790152 NEW CALL INDICACTOR REPEA T CALL INDICAT OR NEW CALL REP 27 CALL ANSWERED 27th ENTRY IN CALLS LOG NAME ONLY PROVIDED I F THE NUMBER CALLI NG & ASSOCIATED NAM E HAVE PREVIOUSLY BEEN STORED IN THE TELEPHONES' MEMO RIE S Call W aiting CLI When off hook the Berkshire 800 allows you to receive a second call.
screen displays “PLEASE W AIT” and then returns to the “On-hook” screen. V olume and Pitch Controls The Ringer volume and pitch and the telephone’s speaker , handset and headset volumes can be set for individual preference. RINGER VOLUME CONTROL There are 4 Ringer V olume settings available, (1 = Low , 4 = High).
MEMORY 01 - 10 ? Press the required memory location, (e.g. 04). The LCD will display the following: SET MEMORY 04 Press the “MENU/ENTER” key . The display temporarily displays “ENTER NEW NUMBER”, and then displays the “Entry” screen, as shown below .
area of the directory , (e.g. pressing the “5” key will bring up the fi rst entry beginning with “J”). 05 JOHN SM ITH 02920212068 DIRECTORY ENTRY 05 HR : M IN DAY / MON TH Press the “MENU/ENTER” key . The LCD displays “ADD ENTRY”. Use the UP (5) or DOWN (6) key to scroll through displays until “DELETE ENTRY” is displayed.
MEMORY LOCK OFF OFF FLA SHES Use the UP (5) or DOWN (6) key to toggle between “OFF” and “ON”. MEMORY LOCK ON ON FLA SHES Press the “MENU/ENTER” key to con fi rm the memory lock requirement. DIRECTOR Y The Berkshire 800 directory can store up to 100 entries, organised by name (See Section 3.
MEMORY LOCK OFF OFF FLA SHES Use the UP (5) or DOWN (6) key to toggle between “OFF” and “ON”. MEMORY LOCK ON ON FLA SHES Press the “MENU/ENTER” key to con fi rm the memory lock requirement. DIRECTOR Y The Berkshire 800 directory can store up to 100 entries, organised by name (See Section 3.
area of the directory , (e.g. pressing the “5” key will bring up the fi rst entry beginning with “J”). 05 JOHN SM ITH 02920212068 DIRECTORY ENTRY 05 HR : M IN DAY / MON TH Press the “MENU/ENTER” key . The LCD displays “ADD ENTRY”. Use the UP (5) or DOWN (6) key to scroll through displays until “DELETE ENTRY” is displayed.
MEMORY 01 - 10 ? Press the required memory location, (e.g. 04). The LCD will display the following: SET MEMORY 04 Press the “MENU/ENTER” key . The display temporarily displays “ENTER NEW NUMBER”, and then displays the “Entry” screen, as shown below .
screen displays “PLEASE W AIT” and then returns to the “On-hook” screen. V olume and Pitch Controls The Ringer volume and pitch and the telephone’s speaker , handset and headset volumes can be set for individual preference. RINGER VOLUME CONTROL There are 4 Ringer V olume settings available, (1 = Low , 4 = High).
HR : MIN DAY / MONTH 02920790152 NEW CALL INDICACTOR REPEA T CALL INDICAT OR NEW CALL REP 27 CALL ANSWERED 27th ENTRY IN CALLS LOG NAME ONLY PROVIDED I F THE NUMBER CALLI NG & ASSOCIATED NAM E HAVE PREVIOUSLY BEEN STORED IN THE TELEPHONES' MEMO RIE S Call W aiting CLI When off hook the Berkshire 800 allows you to receive a second call.
will fl ash. Use the UP (5) or DOWN (6) key to toggle between “TBR” and “ELR”. RECALL TYP E : ELR ELR FLASHIN G Press the “MENU/ENTER” key to con fi rm the ELR setting. TBR PERIOD The TBR period is set to 100mS, but is selectable between 50mS and 600mS in steps of 50mS.
Once the call has been established, the display will appear as shown in the following example: HR : MI N DAY / MONT H 02920500700 00 - 02 - 36 CALL DUR ATION TIME NUM BER DIALED Making external calls from a Company exchange (P ABX) may require the number to be pre- fi xed by an access digit, normally a “9”.
shows “ADV ANCED”. Press the “MENU/ENTER” key , then press the UP (5) or DOWN (6) key until the display shows “FIRST RING DISABLE”. FIRST RING D ISABLE Press the “MENU/ENTER” key again and the “FIRST RING DISABLE” setting will fl ash.
Preparing to use the Berkshire 800 INITIAL CHECK Our telephones are checked, tested and leave us in perfect condition. If yours is damaged, please return it to your supplier with proof of purchase, for a replacement.
A TL T elecom Limited reserves the right to make changes to this document at any time without notice. Power Rating Information – AC Plug T op Adapter Input 230V ~ 50 Hz, 50mA. Output 7.5V ~ 50 Hz, 300mA. A TL recommends only using the approved adapter supplied with this product (A TL Part Number 5/500/ X00/064).
An important point after buying a device ATL Berkshire 800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATL Berkshire 800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATL Berkshire 800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATL Berkshire 800 you will learn all the available features of the product, as well as information on its operation. The information that you get ATL Berkshire 800 will certainly help you make a decision on the purchase.
If you already are a holder of ATL Berkshire 800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATL Berkshire 800.
However, one of the most important roles played by the user manual is to help in solving problems with ATL Berkshire 800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATL Berkshire 800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
