Instruction/ maintenance manual of the product VS174 ATen
Go to page of 12
VS172 / VS174 2/4-Port DVI Dual Link Splitter with Audio RS-232 Control T ool User Manual www.aten.com.
VS172 / VS174 RS-232 Control T ool 2 FCC Information This is an FCC Class A product. In a dom estic environment this product may cause radio interference in which ca se the user may be required to take adequate measures.
VS172 / VS174 RS-232 Control Tool 3 RS-232 Control T ool Operation Overview The VS172 / VS174 2/4-Port DVI Dual Link Split ter with Audio has a built- in bi-directional RS-232 seri al interface that allows system control through a high-end controller, PC, and/or home autom ation / home theater software package.
VS172 / VS174 RS-232 Control T ool 4 GUI Main Page The RS232 Control Tool is a convenient and intu itive method to manage the RS-232 commands in your VS172 / VS174 installa tion from one screen. To invoke the GUI, simply cl ick on the icon in your file system.
VS172 / VS174 RS-232 Control Tool 5 Switch Port On the Switch Port page, the following actions are possible: Select the Output port from the drop-down menu (options are Po rts 1–4 and default *). Addit ional drop-down me nus are added for every cascaded unit (up to three).
VS172 / VS174 RS-232 Control T ool 6 Switch Port Commands These actions can also be performed by keying the command into the text box, and clicking Send .
VS172 / VS174 RS-232 Control Tool 7 EDID Mode On the EDID Mode page, the following actions are possible: Click on Port 1(*) to implement the EDID of th e connected display to Port 1, and pass it to the video source (default). Click Auto to implement the EDID of all connected displays.
VS172 / VS174 RS-232 Control T ool 8 Mute On the Mute page, the following actions are possible: Select an Output port from the drop-down menu. Click ON to mute the selected port. Click OFF to enable the audio of the selected port. Click Send to send the command.
VS172 / VS174 RS-232 Control Tool 9 Read Info On the Read Info page, the following actions are possible: Select an Output from the drop-down menu. Click V ersion to view the current firmware version. Click EDID to see which EDID setting is implemented to device 01.
VS172 / VS174 RS-232 Control T ool 10 Reset On the Reset page, the following actions are p ossible: Select an Output port from the drop-down menu. Click Reset to reset the VS172 / VS174 to default factory settings. Click Send to send the command.
VS172 / VS174 RS-232 Control Tool 11 RS-232 Setting The controller’s seri al port should be conf igured as follows: To select the serial port, do the following: Select the port and baud rate from the drop-down menus and click CONNECT .
VS172 / VS174 RS-232 Control T ool 12 This Page Intentionally Left Blank.
An important point after buying a device ATen VS174 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATen VS174 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATen VS174 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATen VS174 you will learn all the available features of the product, as well as information on its operation. The information that you get ATen VS174 will certainly help you make a decision on the purchase.
If you already are a holder of ATen VS174, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATen VS174.
However, one of the most important roles played by the user manual is to help in solving problems with ATen VS174. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATen VS174 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
