Instruction/ maintenance manual of the product VE892 ATen
Go to page of 14
VE882 / VE892 USER MANUAL HDMI Optical Extender.
FCC Information This is an FCC Cl ass A product. In a domestic en vironment th is product ma y cause radi o interfer ence in whic h case the user may be required t o take adequate meas ures. This equipme nt has been tes ted and found to comply with the limits for a Class A d igital d evice, purs uant to Part 1 5 of the FCC Ru les.
- 3 - VE882 / VE892 User Manu al Online Registr a tion Telephone Suppor t Technic al Support For international online technical support – i ncluding troubleshooting, documentation, and software updates: http://es ervice.aten. com For North American technical support: International http://eservice.
- 4 - Pa c k a g e C o n t e n t s The VE882 / VE892 package contains the following items: 1 VE882T or VE892T 1 VE882R or VE892R 1 IR T ransmitter 1 IR Receiver 1 Mounting kit 2 Power Adapters 1 User Instructions* Check to make sure t hat all the components are present and that nothing got damaged in shipping.
- 5 - Over view The VE882 / VE892 is an HDMI Optical Extender that overcomes the length restriction of standar d HDMI cables by using op tical fiber to send high definition audio an d video signals over large distances. It accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.
- 6 - Fe at u r e s Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable* V ery long distance transmission – up to 600m for VE882, up to 20km for VE892 HDMI (3D, Deep Color), HDCP compatible – signaling rates up to 3.
- 7 - Consoles An HDMI display with HDMI T ype A output connector Computers Video source with an HDMI T ype A input con nector Cables Fiber optic cable (LC, single mode) to connect the Tra.
- 8 - Components T o p V i ew F ront V iew No. Component Description 1 Power / Link LED The LED blinks to indicate that t he unit is receiving power . The LED lights to indica te that the fiber is detected, and communication between th e transmitter and receiver is reliable.
- 9 - Rea r Vie w *The Optical IN/OUT port’ s color varies as follows: VE882T - Brow n VE882R - Y ellow VE892T - Purple VE892R - White No. Component Description 1 Optical IN/ OUT Port* The fiber optic cable that connects the T ransmitter and Receiver Units pl ugs in here.
- 10 - W all Mounting For convenience and flexibi lity, the VE882 / VE892 can be mounted on the wall. To mount a unit do the fol lowing: 1. Using the scre ws provided in the Mounting Kit, screw the mounting brackets into the side panels of the unit as show in the diagram below: Note: 1.
- 11 - Inst alla tion Refer to the installati on diagram on the next page (the numbers in the diagram correspond to the numbers of the steps) and do the following: 1. Connect the HDMI input port on the VE882T/VE892T to the HDMI output port on your video source device using HDMI cable.
- 12 - 2 2 3 3 2 1 2 4 6 HDMI Source Device HDMI Display Device 7a IR Port IR Port 6 3 7b 5 3 5 Serial Device VE882R/VE892R VE882T/VE892T.
- 13 - RS-232 Channel T r ansmis sion The RS-232 signal transmission flow is shown in the following illustration: From a source device, the RS-232 signal is transmitted (Tx) to the VE882T/VE892T receiving (R x) unit; the VE882R/VE89 2R transmits (Tx) signals to the display device (Rx).
- 14 - Specifica tions *Note: Operating distance is approximate. These are typical maximum distance that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
An important point after buying a device ATen VE892 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATen VE892 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATen VE892 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATen VE892 you will learn all the available features of the product, as well as information on its operation. The information that you get ATen VE892 will certainly help you make a decision on the purchase.
If you already are a holder of ATen VE892, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATen VE892.
However, one of the most important roles played by the user manual is to help in solving problems with ATen VE892. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATen VE892 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
