Instruction/ maintenance manual of the product VE813 ATen
Go to page of 25
HDMI HDBaseT Extender with USB VE813 User Manual www.aten.com.
VE813 User Manual ii EMC Information FEDERAL COMMUNICATIONS COMMISSI ON INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Ru les.
VE813 User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Suppo rt For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the manufacturer.
VE813 User Manual iv Package Content s The VE813 package consists of: 1 VE813T HDMI HDBaseT Extender with USB 1 VE813R HDMI HDBaseT Extender with USB 1 HDMI Cable 1.
VE813 User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006.
VE813 User Manual vi About this Manual This User Manual is provided to help you get the most from your system. It covers all aspects of installation, configuration and operatio n. An overview of the information found in the manual is provided below. Chapter 1, Introduct ion, introduces you to the VE81 3 system.
VE813 User Manual vii Conventions This manual uses the following conv entions: Product Information For informatio n about all ATEN products and how they can help you co nnect without limits, visit ATEN on the Web o r contact an ATEN Au thorized Reseller.
1 Chapter 1 Introduction Overview The VE813 HDM I HDBaseT Extender is an HDMI and USB Extender that supports HDBaseT and Extreme USB t echnology. The VE813 can extend an HDMI signal up to 100 meters from the HDMI source using a single Cat 5e/6 cable. The VE813 supports HD MI features such as 3D, Deep Color, 4k2k, CEC and HDCP.
Chapter 1. Introduction 2 Features Implements HDBaseT extension technol ogy using only one Cat 5e cable to connect the transmitter and receiver Long distance transmission – up to 100 m S.
VE813 User Manual 3 Requirement s Display An HDMI display capable of the high est resolution you will be using Source Device The following equipmen t is required: A source device with an HDMI port A computer or device that is USB compatible USB 1.
Chapter 1. Introduction 4 Operating Systems Supported operating systems are shown in the table, below: Note: The VE813 does not support an OS that do not support U SB. OS Ve r s i o n Windows 2000 and higher Linux RedHat 9.0 and higher SuSE 10 / 1 1.1 and highe r Debian 3.
VE813 User Manual 5 Component s VE813T (T ransmitter) Front and Rear V iew No. Component Description 1 LEDs The VE813T has four LEDs to indicate operating status – Power , Link, USB, and Video. 2 Unit to Unit Port The Cat 5e cable that connects the Transmitter and Receiver plugs in here.
Chapter 1. Introduction 6 VE813R (Receiver) Front and Rear V iew No. Component Description 1 LEDs The VE813R has four LEDs to indicate operating status – Power , Link, U SB, and Video. 2 Unit to Unit Port The Cat 5e cable th at connects the T ransmitter and Receiver plugs in here.
7 Chapter 2 Hardware Setup Rack Mounting For convenience and flexibili ty, the VE813 can be mounted on system racks. To rack mount a unit do the following: 1. Remove the two screws on the bottom of the VE813: 1. Important safety in formation regarding the placement of this device is provided on page 14.
Chapter 2. Hardware Setup 8 2. Using the screws provided in the Mounting Kit , screw the mounting bracket on to the bottom of the unit as show in the diagram , below: 3. Screw the bracket into any co nvenient location on the rack. Note: These screws are not provided.
VE813 User Manual 9 Inst allation Grounding To prevent damage to your installation it is important that all devices are properly gro unded. 1. Use a grounding wire to ground both uni ts by connecting one end of the wire to the grounding terminal, and the other end of the wire to a suitabl e grounded object.
Chapter 2. Hardware Setup 10 3. For increased grounding protection , use STP (shielded twisted pair) cable to connect the Tr ansmitter and Receiver units. There are two methods that can be used: a) In addition to the ei ght paired wires, STP cable also contains a grounding wire.
VE813 User Manual 11 Setting Up Setting up the VE813 HDMI Extender system is simply a m atter of plugging in the cables. Make sure that all the eq uipment to be connected are powered off. Refer to the installatio n diagram on the following page and do the fo llowing: 1.
Chapter 2. Hardware Setup 12 Inst allation Diagram 7 VE813T Rear View 5 6 Cat 5e cable VE813R Rear View 4 1 HDMI cable Local PC 3 2 USB cable 3 USB Device.
13 Chapter 3 Operation LED Display The VE813 Transmitter and Receiver units have front panel LEDs to indicate their operating status, as shown in the tabl es, following: VE813T (T ransmitter) and VE813R (Receiver) LED Indication Power (Green) Lights to indicate that the system is receiving power .
14 Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. This product is for indoor use only . Do not place the device on any unstable surf ace (cart, stand, table, etc.
VE813 User Manual 15 If an extension cord is used with this device make sure that the total of the ampere ratings of all products us ed on this cord does not exceed the extension cord ampere rating. Mak e sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
Appendix 16 Mounting Before working on the rack, make su re that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.
VE813 User Manual 17 T echnical Support International For online technical support – including troubleshooting, docum entation, and software updates: http://eservice.
Appendix 18 Specifications Function VE813T VE813R Connectors HDMI In 1 x HDMI T ype A Fema le (Black) N/A HDMI Out N/A 1 x HDMI T ype A Female (Black) USB 1 x USB T ype B Female (White) 3 x USB T ype .
An important point after buying a device ATen VE813 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATen VE813 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATen VE813 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATen VE813 you will learn all the available features of the product, as well as information on its operation. The information that you get ATen VE813 will certainly help you make a decision on the purchase.
If you already are a holder of ATen VE813, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATen VE813.
However, one of the most important roles played by the user manual is to help in solving problems with ATen VE813. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATen VE813 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
