Instruction/ maintenance manual of the product CE-220L ATEN Technology
Go to page of 14
CONSOLE REMOTE I /O AC 9V CONSOLE REMOTE I /O AC 9V User Manual CE-220 Read this guide thoroughly and follo w the installation and operation procedures car efully in order to prevent any damage to the units and /or any devices that connect to them.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 1 - Over view Because the CE-220 KVM Extender System allows a ccess to a computer system from a remote console (keyboard , monitor , and mouse), it is perfect for factory and construction sites, or .
- 2 - Fe at u r e s Inexpensive, reliable, Cat 5 cabl e to connect the local and remote units—up to 150 meters apart Dual console operation —contro l your system from both the local and re.
- 3 - Computers The following equipment must be installed on each computer that is to be connected to the system: With PS/2 T ype Connectors: A VGA, SVGA, or Multisync card A 6-pin mini-DIN mo.
- 4 - Components The Loc al Unit (CE-220L) Front V iew: # Description Function 1 Operating Mode Selection Switch Pressing this button t oggles between th e operating mode choices: Local: only the loca l console can contro l the system(s) Auto: both consoles can control the system(s).
- 5 - The Loc al Unit (CE-220L) Rear View: Note: If you are combining the CE- 220 w ith a KVM sw itch, the KVM cable connects back to the respective ports on the Console section of the switch.
- 6 - The Remote Unit (CE- 220R) Front V iew: # Description Function 1 LEDs The Remote Unit has two LEDs (Power and On Line) t o indicate the operat ing status of the Local and Remote units (see CE-220R (Remote Unit) , p. 9). 2 Mouse Port The remote PS/2 mouse plugs into this connect or .
- 7 - Inst alla tion Setting up the CE-220 KVM Exte nder system is simply a matter of plugging in the cables. Refer to the installation diagra m on the following page and do the following: 1. Make sure that all the equipment to be connected up is powered O ff.
- 8 - 10.Plug the second power ada pter (supplied with this package) into an AC source ; plug the adapter 's pow er cable into the CE-220R's Power Jack. CE-220L Rear View CE-220L FrontView CE-220R CPU CONSOLE REMOTE I /O AC 9V CONS OLE REM O TE I /O LONG SHO RT RANGE AC 9V CE220.
- 9 - Oper a tion The Local and Remo te Units each have two LEDs to indicate their operating status, as shown in the tables, below: CE-220L (Loc al Unit) CE-220R (Remote Unit) LED Operating Mode Local Auto Local Lights to indi ca te that the local console is active (the Remote LED is out).
- 10 - T roubleshooting TP W iring Diagr am TP Pin As signments Problem Action No video Make sure that all cables are securely plugged into their sockets.
- 11 - Specifica tions Function CE-220L CE-220R Connectors Keyboard 2 x 6-pin Mini-DIN F 1 x 6-pin Mini-DIN F Mouse 2 x 6-pin Mini-DIN F 1 x 6-pin Mini-DIN F Monitor 1 x HDB-15 M 1 x HDB-15 F 1 x HDB-15 F Unit to Unit LEDs 1 x Local 1 x Power On 1 x Remote 1 x On Line Function Keys 1 x Local/Auto Select N/A Cable Length 150m [500'] (max.
- 12 - Limited W arr anty IN NO EVENT SHALL THE DIRECT VENDOR'S LIA BILITY EXCEED THE PRI CE PAID FOR THE PRODUCT FROM TH E DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.
An important point after buying a device ATEN Technology CE-220L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN Technology CE-220L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN Technology CE-220L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN Technology CE-220L you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN Technology CE-220L will certainly help you make a decision on the purchase.
If you already are a holder of ATEN Technology CE-220L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN Technology CE-220L.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN Technology CE-220L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN Technology CE-220L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
