Instruction/ maintenance manual of the product KA-9250 ATEN
Go to page of 10
User Manual KA9250 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them.
Note: This equipment has been tested and found to comply with the limits for a Class B digital dev ice, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protecti on against harmful interference in a resid enti al in stal lati on.
Overview The KA9250 KVM E xtender Module allows the KH0116 and KL0116 16 Port High Density K VM Switc hes to be operated from a remote consol e up to 150m away. The KA9250 module connec ts to the KH0116 or KL0116’ s RJ-45 Remote Console port vi a industry s tandard Category 5 cable for a neat and reliable instal lation.
Installation Requirements Remote Console M A VGA, S VGA, or Multi sync monitor capabl e of the highest resolution that y ou will be using on any c omputer in the instal lation M A PS/2 sty le keyboard M A PS/2 sty le mouse Note: 1.
Rear View 1. LEDs The KA9250 has two LEDs (Power and Link) to indicate the operating status of the Local and Remote units (see p. 7, for details). 2. Mouse Port The remote PS/2 mouse plugs into this connec tor. 3. Keyboard Port The remote PS/2 keyboard pl ugs into this c onnector.
Installation All installati on involves is pluggi ng cables i nto their appropriate ports. Refer to the diagrams on the next page as you perform the following steps: 1. Plug the keyboard, moni tor, and mouse cables for the remote console devices into their ports on the Cons ole side of the K A9250.
- 5 - 3 2 1 C P U R E M O T E I / O AC 9V LINK POWER KL0116 3 2 1 C P U R E M O T E I / O A C 9V LINK POWER KH0116 2003-01-17.
Operation The default operating environment i s for both the Local and Remote consoles to be ac tive. For security and pri vacy purposes , however, the Remote consol e can be disabled so that i t cannot have acces s to the KH0116 / KL0116 or any of the equipment attached to i t.
KA9250 (Remote Console): LED Indication Power 1. Lights steadily to indicate that the connection to the Local Unit is ok. 2. Flashes when there is a problem with the connection to the Local Unit. Link 1. Lights when the remote console is active. 2. Is Off when the local console is active.
Troubleshooting Symptom Action No Video Make sure that all cables are securely plugged into their sockets. Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR ’ S LIABILITY EXCEED THE PR ICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.
An important point after buying a device ATEN KA-9250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN KA-9250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN KA-9250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN KA-9250 you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN KA-9250 will certainly help you make a decision on the purchase.
If you already are a holder of ATEN KA-9250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN KA-9250.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN KA-9250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN KA-9250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
