Instruction/ maintenance manual of the product SCD603 Philips AVENT
Go to page of 18
S C D 6 03 Alw a ys her e to help y ou Reg ist er you r prod uc t and ge t su ppo r t at w ww.philips.com/w elcome.
.
3 2 General description I P arent unit 1 Antenna 2 Batter y/pow er -on light 3 V oice activation light 4 Brightness adjustment buttons 5 Video display - icon explanation • a. Parent unit and bab y unit are not linked • b. Batter y status • c. Signal strength symbol • d.
4 B W arning: Unplug the baby unit and mak e sure your hands and the unit are dry when you insert non- rechargeable batteries. D Note: The baby unit has an operating time of 3 hour s when you use it on non-rechargeable alkaline batteries with the night light tur ned on.
5 2 Inser t the rechar geable batter y . D Note: Make sure the + and - poles point in the right direction. 3 Reattach the lid. 4 Inser t the appliance plug into the parent unit and inser t the adapter into an electr ical outlet.
6 4 Using the appliance 1 Place the parent unit and the baby unit in the same room to test the connection. Make sure the baby unit is at least 1.5 meters (5 feet) a way from the parent unit. 2 Set the on/off switch on the baby unit to the ON position.
7 4.1 P ositioning the bab y monitor B W arning: K eep the baby unit out of the r each of the baby . Nev er place the baby unit inside or mount it on the baby’ s bed or pla ypen. D Note: If you use a cordless phone, wireless video , Wi-Fi network, microwa ve oven or Bluetooth on 2.
8 For more information on the oper ating range , see section ‘Operating r ange’ below . 4.1.1 Operating range The operating r ange of the baby monitor is 150 meter s (490 feet) in open air and line of sight. Indoor s the operating r ange is up to 30 meter s (98 feet).
9 5.3 Sound le vel lights The parent unit continuously monitors the sound level in y our baby’ s room and the sound level lights let you kno w if there is any activity . If your baby cries, the blue sound lev el lights light up on the parent unit. • As long as no sound is detected, the sound level lights are out.
10 2 Press the nightlight button again to turn off the nightlight. 5.6 Lullab y function 1 Press the lullaby pla y/stop button on the parent unit to play a lullab y . • The lullaby starts to play on the baby unit and is repeated continuously for appr ox.
11 D Note: The display is b lack and white when the infrared lights are on. However , sometimes it is possible to see a greenish image . This is normal due to external light sources.
12 B W arning: Mak e sure the bab y unit and parent unit ar e dr y befor e you connect them again. 3 Clean the adapter s with a dr y cloth. 7 Storag e When you are not going to use the bab y monitor for some time, remov e the non-rechar geable batteries from the baby unit and the rechar geable batter y from the parent unit.
13 • P erhaps the baby unit is not connected to an electrical outlet and the non-rechar geable batteries in the baby unit are empty or there are no non-rechargeable batter ies in the baby unit at all. Connect the baby unit to an electrical outlet or put new non-rechargeable batter ies in the baby unit.
14 Indications on the parent unit Wh y doesn’t the battery status symbol appear on the video displa y of the parent unit when I start to charge the parent unit? • It ma y take a few min utes befor.
15 Operating time/operating range The specied operating range of the baby monitor is up to 150 meters (490 feet) outdoors and up to 30 meters (98 feet) indoors.
16 Wh y isn’t the image on the video displa y clear in night vision? • The distance betw een the baby and the bab y unit may be too large . Make sure that the baby unit is placed 1 to 1.5 meter s (3.5 to 5 feet) a way from the bab y . • Sometimes it is possib le to see a greenish image when the infrared lights are on.
.
4222.005.0391.4 www .philips.com/A VENT Philips Consumer Lifestyle BV T ussendiepen 4, 9206 AD Drachten, Nether lands T rademarks o wned by the Philips Gr oup.
An important point after buying a device Philips AVENT SCD603 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Philips AVENT SCD603 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Philips AVENT SCD603 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Philips AVENT SCD603 you will learn all the available features of the product, as well as information on its operation. The information that you get Philips AVENT SCD603 will certainly help you make a decision on the purchase.
If you already are a holder of Philips AVENT SCD603, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Philips AVENT SCD603.
However, one of the most important roles played by the user manual is to help in solving problems with Philips AVENT SCD603. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Philips AVENT SCD603 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
