Instruction/ maintenance manual of the product VF-AT-D/TAA Atdec
Go to page of 2
A General Features Technical Specifications Maximum Load: 8kg (17.5lbs) per display . Display C ompatibility: Visidec F ocus Articulated Arm Double is compatible with most Flat P anel Displays between 12” and 24” (30cm and 61cm) that feature either 75mm x 75mm or 100mm x 100mm VESA mounting hole patterns.
NOTE: The back to back display configuration shown (below left) can only be used inconjunction with the Bolt Through mounting option. The range of movement shown here applies to both arms of Visidec Focus Articulated Arm Double.
An important point after buying a device Atdec VF-AT-D/TAA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atdec VF-AT-D/TAA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atdec VF-AT-D/TAA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atdec VF-AT-D/TAA you will learn all the available features of the product, as well as information on its operation. The information that you get Atdec VF-AT-D/TAA will certainly help you make a decision on the purchase.
If you already are a holder of Atdec VF-AT-D/TAA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atdec VF-AT-D/TAA.
However, one of the most important roles played by the user manual is to help in solving problems with Atdec VF-AT-D/TAA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atdec VF-AT-D/TAA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
