Instruction/ maintenance manual of the product MG9150J AT&T
Go to page of 12
MG9150J Issue 1 October 1995 AT&T PARTNER® Plus, PARTNER II Communications System Programming Quick Reference Graphics © AT&T 1988.
Centralized Telephone Programming Quick Reference Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11 (Extension 11 programming: P+ > = R3.
System Features Continued GROUP CALLING—RING/PAGE P+ 1 Grp < R2.0, 4 Grp > R3.0 (p. 5-64) PII 4 Grp > R1.0 (p. 5-96) P+ > R4.0 PII > R3.
System Programming Quick Reference Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11 P+ > R 3.0, PII > R1.
Lines DIAL MODE P+ > R1.0 (p. 5-36) PII > R1.0 (p. 5-58) DIAL #201 DIAL a line number (01–12 P+,01– 24 PII) DIAL 1 = Touch-Tone ✔ 2 = Rotary PRESS [ Next Item ] to program another line HOLD DISCONNECT TIME PII > R3.0 (p. 5-94) P+ > R1.
System Programming Quick Reference Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11 TO START SYSTEM PROGRAMMING TO END SYSTEM PROGRAMMING TO CYCLE THROUG.
SYSTEM RESET – PROGRAMMING SAVED P+ > R1.0 PII > R1.0 (p. 5-138) (p. 5-181) IMPORTANT: Using this procedure disconnects any active calls but retains system settings. Use it only if the system fails to function correctly after a power failure or down period.
System Programming Quick Reference Place the Programming Overlay on the dial pad of the system display phone at extension 10 or 11 TO START SYSTEM PROGRAMMING TO END SYSTEM PROGRAMMING TO CYCLE THROUG.
Programming Mixed Telephone Types A Overview This appendix provides information about programming from a PARTNER-34D phone to MLS-model phones and from an MLS-34D phone to PARTNER-model phones.
PARTNER-34D Overlay MLS-6 Phone MLS-18D/12D/12 Phone PARTNER-18D Overlay MLS-34D Phone Figure 1. Programming from a PARTNER-34D Phone 10.
MLS-34D Overlay PARTNER-6 Phone PARTNER-18D/18 Phone PARTNER-34D Phone MLS-18D/MLS-12D Overlay Figure 2. Programming from a MLS-34D Phone 11.
System Identifier The System Identifier feature allows a PARTNER, PARTNER PLUS or PARTNER II system to identify its release number to NSAC personnel. While speaking with the customer, ask them to dial [ Feature ] [ # ] [ 1 ].
An important point after buying a device AT&T MG9150J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T MG9150J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T MG9150J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T MG9150J you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T MG9150J will certainly help you make a decision on the purchase.
If you already are a holder of AT&T MG9150J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T MG9150J.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T MG9150J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T MG9150J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
