Instruction/ maintenance manual of the product Generic 3 AT&T
Go to page of 10
AT&T DEFINITY® Communications System Generic 1 and Generic 3 and System 75 8434 Voice Terminal Quick Reference Guide AT&T 555-230-766 Comcode 107177016 Refer to the procedures on this card to use the features on your 8434 voice terminal. The features here are listed in alphabetical order.
4 5 6 7 Dial outside number, extension, or feature access code you want to store (up to 24 digits). NOTE: You may be able to use the softkeys to add special functions such as Pause, Mark, Wait, or Suppress into the telephone numbers programmed on the AD button.
● List 2 2 ● List 3 Note: An [ Enhcd List ] may also be available. Dial desired list item (1, 2, 3...). AUTOMATIC CALLBACK To automatically place another call to an extension that was busy, or did not answer 1 During call attempt, press softkey below AutCB (if shown on the display) or Press [ AutoCallBk ].
To talk privately with a coworker after answering a redirected call 1 2 3 4 Press [ Transfer ]. ● Call is put on hold. Press the softkey below Cnslt (if shown on the display) or Press [ Consult ] or Dial coworker’s extension. Discuss call, if appropriate.
To retrieve a parked call from any extension. 1 Dial Answer Back access code . 2 Dial extension where call is parked. CALL PICKUP To answer a call placed to a member of your pickup group 1 Press softkey below CPkUp (if shown on the display) or Press [ Call Pickup ] or Dial Call Pickup access code .
2 Key in name with dial pad [last name, comma (use *), first name or initial]. 3 Press [ Next Msg ] for next directory name you wish to see. EXIT/NORMAL (display feature) When you are ready to leave Display or Softkey Mode and return to Normal (call-handling) Mode 1 Press [ Exit ].
To cancel a Leave Word Calling message 1 Press softkey below CnLWC (if shown on the display) or Press [ Cancel LWC ] or Dial Leave Word Calling cancel code .
To adjust ringer volume if necessary (speaker is not active) 1 To raise the volume, press the right half of the Volume control button labeled [ ∧ ∧ ]; to lower the volume, press the left half of the Volume control button labeled [ ∨ ∨ ].
To change from speakerphone to handset 1 Pick up handset and talk. To change from handset to speakerphone 1 Press [ Speaker ]. 2 Hang up handset. To end a speakerphone call 1 Press [ Speaker ] again to hang up.
TIMER (display feature) To see elapsed time 1 2 To start timer, press [ Menu ] and then the softkey below Timer (if shown on the display) or Press [ Timer ]. To stop timer, press [ Menu ] and the softkey below Timer or Press [ Timer ] again. TRANSFER To send present call to another extension or outside number 1 2 3 4 Press [ Transfer ].
An important point after buying a device AT&T Generic 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T Generic 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T Generic 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T Generic 3 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T Generic 3 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T Generic 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T Generic 3.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T Generic 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T Generic 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
