Instruction/ maintenance manual of the product FPS30-8 Phase Technology
Go to page of 4
© 2004 SoundT ube Entertainment, Inc. All rights reserved. REV 07 .20.04 Spe cific ations: FPS 30- 8 System T ype 2 x 50 mm (2.0 in) Stereo high-directivity focused sound, voice coil/8 Ohm direct F requency Response (-3 dB) 1 260 Hz - 18.7 kHz F requency Response (-6 dB) 1 230 Hz - 20 kHz Low F requency (-10 dB) 1 200 Hz - 20 kHz Max.
Te chnical data and downloads include: EASE™ data – 3-D polar plots T ech Sheets – T echnical information and architectural specs for system engineers.
Horiz ontal One Octave Po lars 500 Hz 2 50 Hz 1 000 Hz 4000 Hz 8000 Hz 2000 Hz FP S3 0 FP S3 0 Sound-F ocusing Stereo Speaker T echnical Information for System Engineers T echnical data, EASE ™ plots, SoundT ubeSPEC ™ software & product downloads available at www .
Mechan ical Dr awi ngs Arch itectural Specif ications The loudspeaker shall consist of two 50 mm (2.0 in) transducers with a voice coil diamter of 25 mm (1.0 in). Sound waves from the transducers shall be reflected fr om a 781 mm (30.75 in) Dual-Parabolic ™ sound dome.
An important point after buying a device Phase Technology FPS30-8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Phase Technology FPS30-8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Phase Technology FPS30-8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Phase Technology FPS30-8 you will learn all the available features of the product, as well as information on its operation. The information that you get Phase Technology FPS30-8 will certainly help you make a decision on the purchase.
If you already are a holder of Phase Technology FPS30-8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Phase Technology FPS30-8.
However, one of the most important roles played by the user manual is to help in solving problems with Phase Technology FPS30-8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Phase Technology FPS30-8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
