Instruction/ maintenance manual of the product CL-1.5 Phase Technology
Go to page of 3
T E C H N O L O G Y Custom Installation Series Owners Manual / Installation Instr uctions P ower FL-8 P ow er FL-10 P ow er FL-12 CI-1.5 R MSE Audio Group 8650 College Boulevard Overland Park, Kansas 66210 (866) 663-9770 www .mseaudio.com www .phasetech.
1. Unpack speaker. Leave paint mask in place until after speaker is installed or painting is complete. 3. Use RotoZip or other tool to cut hole. Hole diameter: 5.6 in. (142 mm). 5. If required, attach seismic restraint syste m to hole in clamping arm, then to reinforced structure (safety cable not included) .
1. 2. 1. Nail or screw bracket to joists. 2. Finish installing ceiling. 8. Re move paint mask unless painting is required. In that case, follow steps 9-12 when painting is complete. 10. Attach grille safety clip by placing the large end of the clip over snap-fit post (1), then sliding clip until small end snaps into place around post (2).
An important point after buying a device Phase Technology CL-1.5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Phase Technology CL-1.5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Phase Technology CL-1.5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Phase Technology CL-1.5 you will learn all the available features of the product, as well as information on its operation. The information that you get Phase Technology CL-1.5 will certainly help you make a decision on the purchase.
If you already are a holder of Phase Technology CL-1.5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Phase Technology CL-1.5.
However, one of the most important roles played by the user manual is to help in solving problems with Phase Technology CL-1.5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Phase Technology CL-1.5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
