Instruction/ maintenance manual of the product 6434 AT&T
Go to page of 4
ABBREVIATED DIALING (AD) AT&T DEFINITY® Communications System Generic 2 and System 85 6434 Voice Terminal Quick Reference Guide AT&T 555-104-766 Refer to the procedures on this card to use the features on your 8434 voice terminal. The features here are listed in alphabetical order.
To prevent other bridged terminals from entering a call (on a per call basis) 1 Press the softkey below Excl while active on a call or Press [ Excl xxxxx ] while connected to the call. NOTE: Pressing the softkey below Excl or pressing [ Excl xxxxx ] again reactivates bridging.
EXIT/NORMAL (display feature) When you are ready to leave Display or Softkey Mode and return to Normal (call-handling) Mode 1 Press [ Exit ]. HOLD To put a call on hold 1 Press [ Hold ]. To answer a new call while active on another 1 Press [ Hold ]. 2 Press call appearance button of incoming call.
To change from speakerphone to handset TRANSFER 1 Pickup handset and talk. To change from handset to speakerphone 1 Press [ Speaker ]. 2 Hang up handset. To end a speakerphone call 1 Press [ Speaker ] to hang up. 2 3 4 TEST To test the lights and the display on your voice terminal 1 Press and hold down [ Test ].
An important point after buying a device AT&T 6434 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T 6434 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T 6434 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T 6434 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T 6434 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T 6434, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T 6434.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T 6434. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T 6434 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
