Instruction/ maintenance manual of the product Z2148EMU Perlick
Go to page of 2
Problem: Beer flow is slower with Universal Empty Keg Sensor than with standard Perlick coupler . Probable Cause: Beer Flow Control Handle is in CLEAN position. Solution: Slowly turn Beer Flow Control Handle to ON position. Problem: Beer does not flow after keg is tapped.
INST ALLA TION INSTRUCTIONS T APPING AND CLEANING PROCEDURES Fig. 2 ON Fig. 3 CLEAN Fig. 1 OFF 45 ° 1. Disconnect keg coupler from keg. 2. Open faucet to relieve line pressure and close when flow ceases. 3. Disconnect beer line including seal washer from keg coupler .
An important point after buying a device Perlick Z2148EMU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perlick Z2148EMU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perlick Z2148EMU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perlick Z2148EMU you will learn all the available features of the product, as well as information on its operation. The information that you get Perlick Z2148EMU will certainly help you make a decision on the purchase.
If you already are a holder of Perlick Z2148EMU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perlick Z2148EMU.
However, one of the most important roles played by the user manual is to help in solving problems with Perlick Z2148EMU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perlick Z2148EMU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
