Instruction/ maintenance manual of the product HA24 Perlick
Go to page of 13
Form No. Z2348 Rev . 04.01.2014 15” SIGNA TURE SERIES 24” SIGNA TURE SERIES 48” SIGNA TURE SERIES C-SERIES ADA-COMPLIANT SERIES 18” SHALLOW-DEPTH SERIES HP15 HP24 HP48 HC24 HA24 HH24 Ins talla.
PERLICK RESIDENTIAL INST ALLA TION MANUAL 2 perlick.com T ABLE OF C ONTENTS W arranty I nformation ................................................................. 2 Safety Information .................................................................
3 perlick.com PERLICK RESIDENTIAL INST ALLA TION MANUAL This Warranty does not apply to: • Damage to P roducts occurring during transpor tation. • Pr oduc ts that are used in a manner that is not normal residential or light commercial use .
PERLICK RESIDENTIAL INST ALLA TION MANUAL 4 perlick.com SAFETY PLEASE READ all instructions completely before att empting to install or operate the unit.
5 perlick.com PERLICK RESIDENTIAL INST ALLA TION MANUAL 13-⁄” ⁄” ⁄” INST ALLA TION Unit may tip forward if loaded racks/shelves are all pulled out at the same time. T o prevent tipping, and to pr ovide stable installation, the unit must be secured in place with the anti-tip brackets supplied with the unit.
PERLICK RESIDENTIAL INST ALLA TION MANUAL 6 perlick.com PREP ARING THE SP ACE If the unit is to be installed under a countertop , it is recommended that the count er top be supported by a structure other than the unit itself to prev ent damage to the unit.
7 perlick.com PERLICK RESIDENTIAL INST ALLA TION MANUAL 5). Check interior door openings to make sure the unit is level and square . Install shelving and/or drawers.
PERLICK RESIDENTIAL INST ALLA TION MANUAL 8 perlick.com SHEL VING/DRA WER ADJUSTMENTS Completely empty shelf or dr awer before r emoving . 1. P ull the shelf/drawer out to its furthest position. Locate the tabs in the middle of both extenders. Lift one tab up while pushing the opposite tab down, and pull shelf/ drawer out (F igure 6).
9 perlick.com PERLICK RESIDENTIAL INST ALLA TION MANUAL SUPPO RT Pull door to the side then lower door Remove hinge pin Hinge brackets and mounting screws Hole plugs Hinge brackets and mounting screws 5). Using the screws remo ved in step 3, install the top and bottom hinge brackets from the kit (Fig .
PERLICK RESIDENTIAL INST ALLA TION MANUAL 10 perlick.com 8). Remove the P er lick nameplate from the door fr ont using a plastic putty k nife (F ig. 12). Install the new Perlick nameplate included in the kit. Nameplate 9). Inser t the bearing into the door hinge bracket (Fig .
11 perlick.com PERLICK RESIDENTIAL INST ALLA TION MANUAL 12). Place the lower V-block into the lower cabinet hinge with the notch parallel to the cabinet (F ig. 15). V- block parallel to cabinet TOP VIEW 13). Lift the door assembly and inser t the top pin into the bearing.
PERLICK RESIDENTIAL INST ALLA TION MANUAL 12 perlick.com WOOD O VERLA Y INST ALL A TION (FOR -2 AND -4 MODELS) Befor e beginning installation, check all components for proper t and nish. Scan the QR code to the right with your smart phone to watch a detailed how-to video on installing a wood overlay panel ont o Perlick doors.
Form No. Z2348 Rev . 04.01.2014 Use and Care Guides , Specication Sheets, W ood Overlay T emplates for Doors , Drawers and Grilles, and Corresponding Compliance and Ener gy Guides are available for download at ww w .perlick.com/residential-products/ser vice-suppor t .
An important point after buying a device Perlick HA24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perlick HA24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perlick HA24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perlick HA24 you will learn all the available features of the product, as well as information on its operation. The information that you get Perlick HA24 will certainly help you make a decision on the purchase.
If you already are a holder of Perlick HA24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perlick HA24.
However, one of the most important roles played by the user manual is to help in solving problems with Perlick HA24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perlick HA24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
