Instruction/ maintenance manual of the product DS32 Perlick
Go to page of 12
Form No. Z2280 INST ALLA TION AND OPERA TION INSTRUCTIONS DIRECT DRA W DISPENSER - SELF-CONT AINED MODELS T able of Contents PREP ARING THE CABINET FOR USE Specifications.........................................................2 List of Included Parts .
Form No. Z2280 2 Installation and Operating Instructions Sizes and Specifications, Direct Draw Dispensers - Self-Contained Perlick is committed to continuous improvement.
Form No. Z2280 3 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Preparing the Cabinet for Use – Direct Draw Dispensers Self-Contained Parts List ■ Faucet Standard. ■ Faucet Head Assembly .
Form No. Z2280 4 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Installation and T apping – Direct Draw Dispensers Sel.
Form No. Z2280 5 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Installation and T apping – Direct Draw Dispensers Self-Contained Connecting the Regulator to the CO 2 Cylinder ■ Remove blue plug from regulator fitting.
Form No. Z2280 6 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Draft Beer Information – Direct Draw Dispensers Self-Contained T emperature One of the most common causes of dispensing problems is improper temperature.
Form No. Z2280 7 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Cleaning the Beer System – Direct Draw Dispensers Self-Contained The entire beer system, to include the faucet, flexible beer line and tapping devices must be cleaned at regular intervals.
➠ Form No. Z2280 Pouring a Perfect Glass of Beer – Direct Draw Dispensers 8 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Start with a clean glass. Place the glass at a 45 ° angle, one inch below faucet.
T rouble Shooting – Direct Draw Dispensers Self-Contained Beer Service Problems ■ Wild Beer: Dispensed beer has either too much foam or is all foam. C AUSES : ■ Beer has been dispensed improperly . Solution: See pouring instructions on page 8. ■ Regulator pressure is set too high.
Form No. Z2280 10 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Replacement Parts – Direct Draw Dispensers Self-Contained MODEL NOS. DS60B DS72B DS84B DS60S DS72S DS84S Condensing Units Condensing unit 1 15 volt, 60 hz.
Form No. Z2280 11 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Replacement Parts – Direct Draw Dispensers Self-Contained For Single V alve Keg Coupler (Series D) Item Part No.
Form No. Z2280 8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069 T oll Free 800-558-5592 • E-Mail: Perlick@Perlick.com • www .Perlick.com Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
An important point after buying a device Perlick DS32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perlick DS32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perlick DS32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perlick DS32 you will learn all the available features of the product, as well as information on its operation. The information that you get Perlick DS32 will certainly help you make a decision on the purchase.
If you already are a holder of Perlick DS32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perlick DS32.
However, one of the most important roles played by the user manual is to help in solving problems with Perlick DS32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perlick DS32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
