Instruction/ maintenance manual of the product S-100MM-XXXXX Perle Systems
Go to page of 13
P/N 5500312-10 Perle Fast Fiber to Fiber Media Converters Installation Guide S-100MM-XXXXX.
Fast Fiber to Fiber Media Converter – Installation Guide 2 Overview This docum ent contains instr uctions necessar y for the installation and operation of the Perle Fast Fiber t o Fiber Standa lone Media Converters (S-10 0MM). These prod ucts allow dissim ilar 100Base- X fiber interfaces to connect to o ne another.
Fast Fiber to Fiber Media Converter – Installation Guide 3 Inst allation The default s witch settings (all s witches in the UP p osition) will work for m ost installations. These are the st eps required to co nfigure the Perle Fa st Fiber to Fiber media convert er: 1.
Fast Fiber to Fiber Media Converter – Installation Guide 4 DIP S w itch Setti ngs Link Mode (Sw itch 1) Switch Position Mode Up (default) Link Pass-T hrough Mode Down Standard Mode Link Pass-T hrough : In this m ode, the link state on one f iber connection is direct ly reflected throug h the media con verter to the other fiber connect ion.
Fast Fiber to Fiber Media Converter – Installation Guide 5 Note: T his switch needs to be set t o either generate or detect the FEF signal. Illustration of the FEF feature Media Converter A Configur.
Fast Fiber to Fiber Media Converter – Installation Guide 6 Remote Loop back Fiber 1 (Switch 3) Switch Position Mode Up (default) Disabled Down Enabled Disabled: The loopback f eature is disabled. This is t he norm al position for regular operation. T he switch must be set t o this position in order f or data to pass throug h the media co nverter.
Fast Fiber to Fiber Media Converter – Installation Guide 7 Installing the Du plex Fibe r Cable Locate a 100Bas e-X com pliant duplex (2 strands) fiber cable with appropriate conn ectors.
Fast Fiber to Fiber Media Converter – Installation Guide 8 Operation Status LED The Perle Fast Fib er to Fiber Media co nverters have three single colored status L EDs located on the f ront panel of the unit. PWR - Po w er/Test • On : Power is on an d in norm al operation.
Fast Fiber to Fiber Media Converter – Installation Guide 9 T roubleshootin g General • Ensure po wer is supplied t o the media converter – use of the supplied power ad apters is highl y recommended. • Ensure both devices on e ither end of the fib er are com patible.
Fast Fiber to Fiber Media Converter – Installation Guide 10 T echnical Specifications The following app lies to all S-100MM m edia converters : Power Input/Co nsumption 12V DC /3.
Fast Fiber to Fiber Media Converter – Installation Guide 11 Model Mode Wavelength (nm) TX Power (dB) RX Power (dB) Budget (dB) S-100MM-S2L C4 0 SM TX: 1310 RX :1310 Min: -5 Max: 0 Min: -34 Max: -3 2.
Fast Fiber to Fiber Media Converter – Installation Guide 12 Compliance Info rmation FCC This product has been found to comply w ith the limits for a Cla s s A digital devi ce, pursuant to Part 15 o f the FCC rules.
Fast Fiber to Fiber Media Converter – Installation Guide 13 Warranty / Registration Perle’s standard Lifetime Warr anty provides custom ers with return to factor y repairs for Perle products that fail under th e conditions of the warrant y coverage.
An important point after buying a device Perle Systems S-100MM-XXXXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perle Systems S-100MM-XXXXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perle Systems S-100MM-XXXXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perle Systems S-100MM-XXXXX you will learn all the available features of the product, as well as information on its operation. The information that you get Perle Systems S-100MM-XXXXX will certainly help you make a decision on the purchase.
If you already are a holder of Perle Systems S-100MM-XXXXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perle Systems S-100MM-XXXXX.
However, one of the most important roles played by the user manual is to help in solving problems with Perle Systems S-100MM-XXXXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perle Systems S-100MM-XXXXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
