Instruction/ maintenance manual of the product S-100-XXXXX Perle Systems
Go to page of 15
P/N 5500301-15 Perle Fast Ethernet Media Con verters Installation Guide S-100-XXX XX.
Fast Ethernet Media Converter – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operation of the Perle Fast Ethernet Standalone M edia Con verters (S-100). Thes e products c onvert a 1 00Base-T X cable c onnection (copper) to a 100Base-X connection (f iber).
Fast Ethernet Media Converter – Installation Guide 3 Installatio n The default s witch settings (all switches in the U P position) will work for m ost installations. There are f ive steps requ ired to conf igure the Perl e Fast Ether net media conv erter: 1.
Fast Ethernet Media Converter – Installation Guide 4 DIP Switches The DIP s witches are ac cessible throu gh the open ing in the s ide of the enclosure Note: All switch cha nges tak e effect imm ediately and will resu lt in a link reset on both ports.
Fast Ethernet Media Converter – Installation Guide 5 Link M ode (Switch 2) Switch Posit ion Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the link state on one connec tion is directly reflecte d throug h the m edia converter to th e other conn ection.
Fast Ethernet Media Converter – Installation Guide 6 If the m edia converter has been s et to Link Pass-T hrough mode, the effec t will be the sam e as FEF, since the link loss on the fiber r eceiver will bring do wn the copp er link, which will in turn c ause the tra nsm it fiber link to be brought d own.
Fast Ethernet Media Converter – Installation Guide 7 Pause (Sw itch 5) Switch Posit ion Mode Up (defau lt) Enabled Down Disabled Enabled: W hen Auto Neg otiation has been set to Auto (SW 1), the media conv erter will use t his setting f or its Ethernet param eter negotiation o n the cop per connection.
Fast Ethernet Media Converter – Installation Guide 8 Installing the Duplex Fiber Cable • Locate a 100 Base-X c ompliant dup lex (2 strands ) fiber cable with male co nnections.
Fast Ethernet Media Converter – Installation Guide 9 Powering up the Perle Media Conv erter • Connect the Perle supp lied power adapter to th e media converter. • Turn on the power at so urce. • Check that the PW R LED light is lit an d on solid.
Fast Ethernet Media Converter – Installation Guide 10 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium -dependant inter face crossover) detects the s ignalling on the 100B ASE-T interf ace to deter mine the type of cabl e connected (s traight-throu gh or cross over) and automatical ly configures t he conn ection.
Fast Ethernet Media Converter – Installation Guide 11 Troubleshooting General • Ensure po wer is supplied t o the m edia converter – use of the supplied po wer adapter s is highl y recomm ended. • Ensure both devices on either end of the fiber are c om patible.
Fast Ethernet Media Converter – Installation Guide 12 Technical Specifications The f ollowing applies to a ll S-100 m edia con verters: Power Inpu t/Consump tion 12V DC / 2.
Fast Ethernet Media Converter – Installation Guide 13 S-100-S2LC80 SM TX: 15 50 RX: 1550 Min: -5 Max: 0 Min: -34 Max: -3 29 S-100-S2SC120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 S-100.
Fast Ethernet Media Converter – Installation Guide 14 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital devi ce, pursuant to Part 15 of the FCC rules.
Fast Ethernet Media Converter – Installation Guide 15 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with r eturn to factor y repa irs for Perle products that fail und er the co nditions of the warrant y coverage.
An important point after buying a device Perle Systems S-100-XXXXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perle Systems S-100-XXXXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perle Systems S-100-XXXXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perle Systems S-100-XXXXX you will learn all the available features of the product, as well as information on its operation. The information that you get Perle Systems S-100-XXXXX will certainly help you make a decision on the purchase.
If you already are a holder of Perle Systems S-100-XXXXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perle Systems S-100-XXXXX.
However, one of the most important roles played by the user manual is to help in solving problems with Perle Systems S-100-XXXXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perle Systems S-100-XXXXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
