Instruction/ maintenance manual of the product Automobile Parts Peripheral Electronics
Go to page of 4
8 T roubleshooting Guide No power / won’t go into programming mode: • Check Red wire connection and fuse. Make sure INTERF ACE is connected to switched +12volts, not constant +12volts.
2 Wiring Connections Step 1. Connect the BLACK wire to ground (-). V eri fi cation: Wire or location reg is ters a con stant (-) when probed. Step 2. Connect the RED wire to switched +12V . V eri fi cation: Wire reg- isters +12V when the ignition key is turned to the ACC or ON posi- tions.
6 T esting the PESWIPS Note: For Sony head units, please refer to the note below . T est each Heater function of the steering wheel controls. The TEMP and F AN should work properly . When testing the audio controls, the left LED on the PESWIPS will fl ash indicating it is sending a command.
4 Step 18. Press and hold program- ming/mode button on PESWIPS. LED will light. Step 19. Release programming/ mode button. PESWIPS PESWIPS PESWIPS Y ou only need to press the programming/mode button once to program all the buttons. If you press this button again after the interface is programmed, it will erase all previous learned buttons.
An important point after buying a device Peripheral Electronics Automobile Parts (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Peripheral Electronics Automobile Parts yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Peripheral Electronics Automobile Parts - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Peripheral Electronics Automobile Parts you will learn all the available features of the product, as well as information on its operation. The information that you get Peripheral Electronics Automobile Parts will certainly help you make a decision on the purchase.
If you already are a holder of Peripheral Electronics Automobile Parts, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Peripheral Electronics Automobile Parts.
However, one of the most important roles played by the user manual is to help in solving problems with Peripheral Electronics Automobile Parts. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Peripheral Electronics Automobile Parts along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
