Instruction/ maintenance manual of the product ICBM-1-TOUCH Performance Teknique
Go to page of 20
An American Ingenuity OPERA TING INSTRUCTIONS BEFORE OPREA TING THE UNIT PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN FOR FUTURE REFEENCE OWENER S RECORD THE MODE AND SERIAL NUMBERS ARE LOCATED ON THE BOTTON. RECORD THE SERIAL NUMBER IN THE SPACE PROVIDED BELOW .
T able of Contents Matters to Note Connection Instructions Key Functions Basic Operations Functional Operations Tuner DVD Playing DVD Setup CD Playing TV Playing Other Functions Supplementary Informat.
Matters to Note: Please comply with the traffic rules in your country. Do not install this in machine where The drivers' view mey be obstructed. The operation of the car or the airbag system will be obstructed. It will obstruct the operation of the car, especially the steerwheel, shift lever and brake pedal.
Reset the micro-processor Press RESET to initialize the micro-processor . The reset operation is needed only when: The machine is used for the first time after installation. This machine does not work well. Abnormal or incorrect information appears in the monitor.
Connection Instructions TV Antenna Connection Instructions Radio Antenna 5 6 Green Grey White Purple Right Back Front Left Back Front Y ellow BA TT Orange Power Antenna Brown Power Amplfier Control Bl.
T ouch Key Functions T ouch Key Functions 7 8 < < MENU SRC SOUND MENU + MODE EQ DISP MUTE ANG EJECT 1 2 3 4 5 6 8 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Tou ch Key F unctions: Notes: Tou ch Keys 1 2 3 5 6 7 a re u sed to activate m enus, they will n ot b e v alid u ntil th ere is no menu d isplay.
T ouch Key Functions T ouch Key Functions 4 Keys Monitor Angel Adjusting Press and to adjust the monitor angels within its variation scope. 5 Key Picture Mode Menu Touch this key to activate picture mode menu.Touch and select wanted picture mode. Four modes are preset here: STANDARD,NIGHT ,CUSTOM,and BRIGHTNESS.
Key Functions Key Functions 7 Funciton T ouch Key T ouch this key , d ifferent menus will a ppear i n d ifferent program sources (DVD,CDC,TV .Please refer t o r elated chapter . Touch Keys V olume Adjusting Touch these keys to increase or decrease the volume.
Keys on Remote Controller Keys on Remote Controller POWER ANGLE ENTER SRC AUX SOUND MENU MENU Lp2508 MODE DISP PLA Y PAUSE SET AS 10+ 13 1 POWER Press it to s witch off t he m achine and the m onitor w ill re tract to the MIN an gel.Press it to s tart t he sy stem on id le sta te, an d the m onitor an gel will rebo und.
Basic Operations SRC Functions The machine is on once the playing source has been selected Press this key to switch between the following playing sources: 1.AUX Select Auxiliary Input 2.CDC Select Disk Input 3.TUNER Select Radio, and radio menu will be displayed 4.
Tuner Press BAND repeatedly until you find needed band. Touch current band area to change the band. The following ba nds will be displayed in turn: FM1--FM2---AM Basic Operations: Advanced Function Op.
DVD Playing DVD Function Operations To Operate with remote controller To use Touch Key Functions: Press the function keys area , the following 2 pages information abou t touch keys will be displaye d. DVD Playing 3 Backward and Forward Press menu adjusting keys on the remote or touch keys and when DVD is pla ying to Backward or Forward.
DVD Playing 7 DVD Information Display 21 CHN Touch key INFO can control the way of DVD info display. 8 OSD Info Display Touch key DISP can control the way of OSD info display . 9 DVD Playing Menu Touch key MENU can activate DVD menu; touch direction keys and OK to play DVD.
23 24 Speaker Setup Center Speaker T one T est Center Delay Rear Speaker Bass Speaker Rear Delay Stereo 5.1 T rack On Setup Mainpage, select Speaker Setup through direction keys, press SET or touch OK.
Playlist Selection Touch and , or press menu adjusting keys on the remote to select Previous or Next item on the playlist. Forward and Backward Press , the system will go forward or backward, relevant information will be given. Press the button again, stop Forward or Backward.
TV½Ó ÊÕ ÆäËü¹¦ÄÜ Clock Check the clock when the machine is in idle state. In idle state, press DISP button on the panel or remote once to display clock as follows: 2 Play Preset Channels Press or open TV touch menu, touch CH+ and CH- to select previous or next channel.
Malfunction Eliminating Problems Problems Possible reasons Possible reasons Can't be switched on, unable to use the machine. Incorrect connection of downlead and linker . Make sure all connections are correct Fuses melted Find out the reason, and replace the fuse of the same specifications.
Maintenance of DVD Maintenance of DVD Use normal disks only .If irregular, non-round or srtange shape disks are inserted, they may be hooked in the machine or can not be played correctly . Check all disks before playing and see whether there are cracks, scrapes or crimp.
MP3 Mp3 is the abbreviation of MPEG audio layer3, which is the standard of audio compression technology . Mp3 files on CD-ROM CD-R and CD-RW can be played in this machine. Disks compatible with ISO9660 level 1 and 2, or with ROMEO and JOLIET system can also be played.
Product Specification: Power 13.8V DC(10.8-14.5V) Grounding system:: Negative Polar Host: max current: 15A size (width*height*depth) Body: 178*100*180mm Weight: 3.
An important point after buying a device Performance Teknique ICBM-1-TOUCH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Performance Teknique ICBM-1-TOUCH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Performance Teknique ICBM-1-TOUCH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Performance Teknique ICBM-1-TOUCH you will learn all the available features of the product, as well as information on its operation. The information that you get Performance Teknique ICBM-1-TOUCH will certainly help you make a decision on the purchase.
If you already are a holder of Performance Teknique ICBM-1-TOUCH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Performance Teknique ICBM-1-TOUCH.
However, one of the most important roles played by the user manual is to help in solving problems with Performance Teknique ICBM-1-TOUCH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Performance Teknique ICBM-1-TOUCH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
