Instruction/ maintenance manual of the product 1450 AT&T
Go to page of 24
2.4 GHz Cordless Speakerphone with Caller ID/Call W aiting 1450 Please also read Part 1 — Important Product Infor mation USER ’ S MANU AL Pa r t 2 A T&T and the globe symbol are registered trademarks of A T&T Corp. licensed to Advanced American T elephones.
© 2002 Advanced American T elephones. All rights reserved. Printed in China. Issue 1A T&T 04/02 1450_book_1ATT 3/26 3/26/02 4:59 PM Page iii.
CONTENTS BEFORE YOU BEGIN . . . . . . . . . . . . . . . 1 Choosing a Location for Y our Phone ........................... 1 About Caller Identification (Caller ID) ................................. 1 INST ALLA TION . . . . . . . . . . . . . . . . . . .
BEFORE YOU BEGIN 1 Choosing a Location for Y our Phone For best r eception quality choose a location for the base unit of y our new telephone: • aw ay from microw ave ovens • aw ay from TVs, VCRs, stereo equipment and computers (Cordless telephones operate at a r adio frequency that may cause interfer ence with these types of equipment.
Before Y ou Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jac k and a standard electrical outlet (110v AC) not contr olled b y a wall s witch. 2 Install the handset battery.
INST ALL A TION 3 3 Attach belt clip to the cordless handset (optional) . T o attach To r e m o v e T able/Desk Installation Standard electrical outlet Modular telephone jack 1 Connect the telephone line cord.
INST ALLA TION 4 3 Charge the handset battery. Place the handset in the base. Charge the battery for at least 12 hours the first time. 4 Check for dial tone. After the batteries are charg ed, pick up the handset and press P ; you should hear a dial tone.
INST ALLA TION 5 a) Align holes on base with mounting studs on wall jack. b) Pull base down on mounting studs until it locks into place. 4 Follow Steps 3–5 in T able/Desk Installation. W all Installation 1 Connect the telephone line cord. 2 Connect the power cord.
HEADLINE LEFT HEADLINE L-SUB 6 TELEPHONE OPERA TION A T THE HANDSET End a Call Press O — OR — Place handset in base. Exit pr ogramming. Cancel a page. Handset Volume While on a call, adjust volume of what you hear . Hold Press to put a call on hold.
HEADLINE RIGHT HEADLINE R-SUB 7 TELEPHONE OPERA TION A T THE HANDSET Handset Ringer Style/Batter y Save Y ou can select from four different handset ring er styles, or tur n the ringer off and extend the battery life. 1 Make sure the handset is off. 2 Press G to enter programming mode.
8 TELEPHONE OPERA TION A T THE HANDSET Operating Range This cordless telephone operates within the maximum pow er allowed by the Federal Communications Commission (FCC).
Flashes when you have unr eviewed call infor mation. 9 TELEPHONE OPERA TION A T THE BASE On steadily: handset is char ging in base Flashing slowly: handset or base speaker is in use or a call is on hold Flashing quickly: ther e is an incoming call Speaker Volume While on a call, use to adjust the volume of what you hear .
TELEPHONE OPERA TION A T THE BASE 10 Indicates a new call has been r eceived If you subscribe to telephone company voice mail with a visual message waiting signal, light flashes when you have voice mail waiting. NOTE: When the handset is in use the P ag e/Inter com and Handset Locator f eatures ar e inactive.
11 Y ou can store 10 telephone number s (up to 16 digits each) in the base memor y locations (0-9). Store a Number in Base Memor y 1 Press g on the base to enter programming mode. The SPEAKER light f lashes. 2 Press the dial pad key (0-9) for the location where y ou want to store the number .
12 TELEPHONE DIRECTOR Y The cordless handset can store 50 telephone numbers with names, each up to 24 digits long. Entries are stored alphabetically . For consistency with Caller ID entries, you may wish to enter last names first. Note: Pr ess O at any time to e xit directory .
13 4 When you finish entering the name, press S or G . The screen displa ys ENTER NUMBER . 5 Enter the telephone number . Use < to backspace and make a correction. Press P to store a pause in the dialing sequence. —OR— Press P to display the last number dialed from this phone.
14 Delete a Number/Name Stored in the Director y 1 Press > (DIR). The screen displa ys DIRECTORY . 2 Press < or > to scroll alphabetically through entries stored in memor y —OR— Press the dial pad key for the first letter of the entr y you want to delete.
15 CALLER ID OPERA TION About Call Histor y This phone assigns each incoming call a number from 1 to 90. The most recent call will have the highest number . When the memor y is full, the oldest call information is deleted to make room f or new incoming call information.
16 CALLER ID OPERA TION Delete Records from Call Histor y Delete a Specific Call 1 Locate the record y ou want to delete from call histor y . 2 Press S , then press < or > until ERASE f lashes. 3 Press S . The screen displa ys ERASE NO YES ALL and the phone number .
17 CALLER ID OPERA TION Store a Call Histor y Record in the Directory 1 Locate the record in call history you want to store in memor y . 2 If you wish to c hange how the number is stored, pr ess # . The screen displa ys any alternate dialing sequences available for this call (ar ea code + number; 1 + area code + number; 1+ number; number only).
18 Charge the Handset Batter y Pack • This batter y should remain charg ed up to six days with the ring er turned on and up to 10 days with the ringer off. A fully charg ed batter y provides an av erage talk time of about 10 hours. • The batter y pack needs c harging when: — A new batter y is installed in the handset.
19 Replacing the Handset Batter y Pack 1 Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cov er downward. 2 Lift out the old battery pack and disconnect. 3 Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place.
20 IN CASE OF DIFFICUL TY If you hav e dif ficulty operating this phone, tr y the sugg estions below . For Customer Service, visit our website at www .tele phones.att.com or call 1 800 222–3111. Please retain your r eceipt as your proof of pur chase .
21 If you hear noise or interference when using the phone: • Make sure the base antenna is fully upright. • Y ou may be out of rang e. Move closer to the base. • Press and release G to c hange to another of the 30 c hannels available. If noise is exceptionally loud, mov e closer to the base bef ore changing channels.
An important point after buying a device AT&T 1450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T 1450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T 1450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T 1450 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T 1450 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T 1450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T 1450.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T 1450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T 1450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
