Instruction/ maintenance manual of the product 145 AT&T
Go to page of 8
RINGER OFF LO HI TONE PULSE 1 2 3 4 5 6 7 ABC DEF GHI JKL MNO PQRS TUV WXYZ TONE OPER MEMORY PROGRAM FLASH REDIAL 8 9 0 # Design Line T elephone 145 USER ’ S MANU AL Pa r t 2 AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
Dial Mode This telephone has a selectable push-button dial and will work with either tone or rotary telephone service. It can be set to work directly with long-distance or certain other services that require tone signaling including some tone activated computer systems.
T ABLE/DESK INST ALLA TION This telephone includes a 7-foot line cord with a modular plug on each end. You’ll use this cord to connect the telephone to a modular jack. 1. Connect line cord to telephone Plug the long line cord into the jack on the underside of the telephone base.
W ALL INST ALLA TION 1. Reverse the handset tab. When mounting the telephone on a wall, you must reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchhook, and slide the tab up and out of its slot (Figure 1). Turn the tab so that the end with the “hook” is up (Figure 2).
5. Set the Dial Mode switch This product comes set in the TONE mode. Make sure you choose the correct dialing method (TONE/PULSE); touch tone dialing will not work if you have dial pulse service. 6. Connect handset to telephone base Connect one end of the coiled handset cord to the base.
5 Redial The telephone always stores in memory the last number dialed. To dial the same number again, lift the handset, and press . The redial memory can accept numbers up to 32 digits long. The number will remain in memory until you change it by dialing another telephone number.
Memor y Features Numbers will remain stored in memory unless you erase or change them by entering other numbers. Capacity: This telephone can store up to nine different phone numbers, each up to 18 digits long. Speed Dialing: Nine telephone numbers can be stored in standard speed-dialing locations.
7 If you have difficulty operating this phone, try the suggestions below. No Dial Tone ☞ Make sure all plugs are connected properly. Inspect the line cord connections at the modular jack and at the telephone. Also inspect the coiled handset cord connections at both ends.
An important point after buying a device AT&T 145 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T 145 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T 145 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T 145 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T 145 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T 145, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T 145.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T 145. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T 145 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
