Instruction/ maintenance manual of the product 710 Pentair
Go to page of 24
IMPOR T ANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SA VE THESE INSTRUCTIONS Installation and User's Guide Prowler ™ 710 Robotic Inground Pool Cleaner.
© 2006 Pentair W ater Pool and Spa, Inc. All rights reserved. This document is subject to change without notice. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles A ve., Moorpark, CA 93021 • (805) 553-5000 T rademarks and Disclaimers.
i Prowler ™ 710 Installation and User ’ s Guide Contents Important Safety Precautions .............................................................................................. i i Section 1: Introduction ......................................
ii Prowler ™ 710 Installation and User ’ s Guide IMPORTANT SAFETY PRECAUTIONS Important Notice: Attention Installer: This guide contains important information about the installation, operation and safe use of this product. This information should be given to the owner and/or operator of this equipment after installation of the pool cleaner .
1 Prowler ™ 710 Installation and User ’ s Guide Section 1 Introduction The Prowler ™ 710 Overview Automatically clean your pool in 60 to 90 minutes or less The fastest and most effective robotic cleaner in its class, the Prowler ™ 710 features true “plug and play” convenience.
2 Prowler ™ 710 Installation and User ’ s Guide General Features The Prowler ™ 710 features three-way cleaning performance: • Dual pressure wash jets lift sand, silt and algae off floors and walls – including surface pores where brushes can’t reach.
3 Prowler ™ 710 Installation and User ’ s Guide Section 2 Set-up The following general information describes how to set-up your Prowler ™ 710 robotic pool cleaner . Carefully read the following so that you are fully aware of all the capabilities and features this cleaner has to offer .
4 Prowler ™ 710 Installation and User ’ s Guide How your Prowler ™ 710 Cleaner works The patented built in pump motor provides the power for your cleaner ’ s jet drive propulsion and hydroscrubbing jets.
5 Prowler ™ 710 Installation and User ’ s Guide Setting up your Prowler™ 710 Cleaner Y our new cleaner consists of two main parts: A. Power Supply (T ransformer) with T wo-Hour Automatic Shut-Off, Figure 1 .
6 Prowler ™ 710 Installation and User ’ s Guide Setting up the Power Supply W ARNING — Risk of electrical shock or electrocution. A ground fault current interrupter (GFCI) must be in place to protect your electric outlet .
7 Prowler ™ 710 Installation and User ’ s Guide Figure 6. Placing the Cleaner into the Pool W ARNING — Risk of electrical shock or electrocution.
8 Prowler ™ 710 Installation and User ’ s Guide Adjusting the Timing Cycle The T ime Control Dial located on the front panel of the Power Supply can be adjusted to allow more or less time between the cleaner's forward and reverse motion, see Figure 8.
9 Prowler ™ 710 Installation and User ’ s Guide The Cleaning Motion in the Pool The size of your pool, and the amount of debris in it, will determine the length of time required to clean the pool.
10 Prowler ™ 710 Installation and User ’ s Guide Cleaning or Changing the Filter Bag 1. Make sure that the Power Supply is turned “OFF” and that the cleaner's Floating Cable is unplugged from the Power Supply.
11 Prowler ™ 710 Installation and User ’ s Guide In-Season Storage W ARNING — Do not allow swimmers in the pool while your pool cleaner is in the pool. Cable can trip or entangle swimmers which could result in drowning. Do not leave your cleaner in the pool when not in use.
12 Prowler ™ 710 Installation and User ’ s Guide.
13 Prowler ™ 710 Installation and User ’ s Guide Section 3 T roubleshooting Use the following troubleshooting information to resolve possible problems with your Prowler™ 710 pool cleaner . Problem Corrective Action Slower motion or inefficient vacuuming.
14 Prowler ™ 710 Installation and User ’ s Guide Problem Corrective Action Does not reverse direction. T ake a garden hose with high pressure, spray into the V alve Housing at each V alve Port opening, ( Figure 2, Item 9 ). This should free the Jet V alve System of any debris.
15 Prowler ™ 710 Installation and User ’ s Guide Figure 17. Figure 18. Figure 19. Figure 20..
16 Prowler ™ 710 Installation and User ’ s Guide Section 4 Replacement Parts Prowler ™ 710 Model 12.0" 17.0" 20.1" 5 1 2 3 4 6 7 8 9 9 10 10 11 11 12 13 13 14 14 15 15 15 15 16 16.
17 Prowler ™ 710 Installation and User ’ s Guide Replacement Parts List for the Prowler ™ 710 Model IT E M P/N’ s DESCRIPTION QT Y . NO. 1 BODY S-AS BLUE/BLUE 300C WITH SLOT 1 2 SWITCHING WEDGE ASSY . 1 3 P12144 V A L V E HOUSING ASSY . 1 4 P12141 PUMP MOTOR ASSY .
18 Prowler ™ 710 Installation and User ’ s Guide Notes.
Prowler ™ 710.
P/N P12153 Rev . A 2/23/06.
An important point after buying a device Pentair 710 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pentair 710 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pentair 710 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pentair 710 you will learn all the available features of the product, as well as information on its operation. The information that you get Pentair 710 will certainly help you make a decision on the purchase.
If you already are a holder of Pentair 710, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pentair 710.
However, one of the most important roles played by the user manual is to help in solving problems with Pentair 710. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pentair 710 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
