Instruction/ maintenance manual of the product 80YV0102 Pella
Go to page of 14
These instructions wer e tested and developed for replacing windows in wood-frame wall construction systems designed to manage moisture. This method of installation involves r emoving the sash, fr ame stops and frame har dware fr om the existing window .
1 REMOVE THE EXISTING SASH Note: Remove the new window from its packaging. Inspect and measure the new window to confirm it will fit into the opening prior to removing the existing window . The window needs to be 3/8" smaller in both width and height than the pocket frame, i.
3 WINDOW PREP ARA TION (A WNING and CASEMENT ONL Y) The interior frame covers must be r emoved to provide access to the pre-drilled frame scr ew installation holes. CAUTION: T o Avoid Interior F rame Cover Break age - Car efully read and understand the following steps before pr oceeding with cover removal.
B1 B2 Spline hole B. Remove Interior F rame Cover #1. IfanInteriorF rameCoverhasa"QuickReleaseBand" around the cover , pull the band to help r emove the cover . The cover on vent units wher e the lock handle slot is located and the cover on the opposite frame side.
C2 C3 C. R emove Interior F rame Cover #2. The cover on vent units wher e the crank handle and roto-cover will be loca ted. F orStandardAwning, singleunitsgreaterthan42"inheightandmultiplewindow combinations.
Note: P osition shims to ensure they allow at le ast 1/2" from the exterior surface of the window to allow for placement of backer rod and sealant. 4 SETTING AND F ASTENING THE WINDOW AWNING/CASEMENT A. Insert the window and center it in the opening to allow clearance for shimming.
SHIM and F ASTENER PLACEMENT GUIDE Number of factory drilled fastener locations may vary depending on size of unit(s). = Indicates typical locations of factory drilled anchor holes where scr ews and shims are requir ed. = Indicates location wher e installation screws ar e optional.
Mullion plate Mullion plate Mullion plate 3-Way Combination V ent & Fixed Casement, Standard Awning, Large Awning Mullion plate Mullion plate 3-Wide Combination V ent & Fixed Casement, Large A.
AWNING/ CASEMENT Re-install Interior F rame Covers. Note: Discard all Quick Release Bands befor e re-installing Interior F rame Covers. I. Interior F rame Cover #3 (He adcoveronCasement, .
Note: On the exterior , there must be enough room for back er rod and 3/8" sealant bead. N. Insert shims between the window and the opening at the top two anchor hole locations inthewindowjambs.K eepshimsback1/2" from interior face of window.
Note: It may be necessary to squeeze the end of the tube with pliers to be able to insert into the space between the window frame and the r ough opening.
Any exposed wood and flashing tape on the exterior needs to be covered/pr otected. There are many ways to accomplish this, and each case can be unique. Afewpossibilitiesinclude: a) Coveringtheexistingtrimwithaluminumcoilwrap/ frame expander .
LOCK LEVER REMOV AL AND INSER TION Note: Y ou may want to remove the lock lever if it needs to be replaced with a dif ferent finish. A. Unlock and open the window .
P art Number: 80YV0102 FINISH The interior and exterior fr ame and sash are pr otected by a powder coat baked-on factory finish that requir es no painting. Clean this surface with mild soap and water . Stubborn stains and deposits may be removed with mineral spir ts.
An important point after buying a device Pella 80YV0102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pella 80YV0102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pella 80YV0102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pella 80YV0102 you will learn all the available features of the product, as well as information on its operation. The information that you get Pella 80YV0102 will certainly help you make a decision on the purchase.
If you already are a holder of Pella 80YV0102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pella 80YV0102.
However, one of the most important roles played by the user manual is to help in solving problems with Pella 80YV0102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pella 80YV0102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
