Instruction/ maintenance manual of the product WS5000 Pelco
Go to page of 8
Video Security System ® Endura ™ WS5000 Software Recovery Instructions C1677M (7/05).
2 C1677M (7/05) This document describes how to restore the WS5000 software or the Windows ® XP operating system in the event that either of these becomes corrupted. The procedures contained in this document will restore the WS5000 software and the Windows XP operating system back to their original factory default settings.
C1677M (7/05) 3 Recovering the WS5000 Software Follow these instructions if Microsoft Windows is still operable on the workstation but the WS5000 software fails to start properly . 1. If you are logged on as a user , close all programs and log out. NOTE: It is not enough to switch users to the WS5050 Administrator .
4 C1677M (7/05) Recovering the Windows Operating System from the Boot Image Y ou must restart the workstation in Recovery Mode if you want to restore the operating system from the boot image. If Windows will still start but is damaged, you can follow the first set of steps below .
C1677M (7/05) 5 Recovering the System from a Recovery DVD If the operating system software on the disk drive is so badly damaged that you cannot restore it directly from the drive, follow these instructions to restore the operating system from the recovery DVD you received with the WS5050 workstation.
6 C1677M (7/05) To activate Windows XP for a proxy server: a. From the Windows Start menu, select Control Panel. b. Double-click Internet Options, and then open the Connections tab. c. Under Proxy Server , check the box for “Use a proxy server for your LAN,” and then enter the IP address and port number .
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco WS5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco WS5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco WS5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco WS5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco WS5000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco WS5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco WS5000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco WS5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco WS5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center