Instruction/ maintenance manual of the product WLV500-3 Pelco
Go to page of 6
Pelco Manual C901M – 1/94 1 INSTALLATION/OPERATION MANUAL WLV500 SERIES WIRELESS VIDEO TRANSMISSION SYSTEMS 1.0 SCOPE The information contained within this manual covers the installation and operation of the PELCO WLV500 Series wireless control link system.
2 Pelco Manual C901M - 1/94 RF Transmitter Radiated Power: FCC Part 15 (15.249) Transmit Antenna: Attached circular polarized patch Receive Connector: TNC Receive Input Impedance: 50 ohms Frequency Op.
Pelco Manual C901M – 1/94 3 4. The units should become fully operational within two minutes after DC power is con- nected, after which adjustments can be made.
4 Pelco Manual C901M - 1/94 4.3 TROUBLESHOOTING It is recommended that the wireless transmission con- trol link system be first tested with both the WLV500 and WLV1000 transmitters and receivers in cl.
Pelco Manual C901M – 1/94 5 5.0 WARRANTY AND RETURN INFORMATION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1994, Pelco. All rights reserved.
6 Pelco Manual C901M - 1/94 PELCO 3500 Pelco Way, Clovis, CA 93612-5699 ( 55 9) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or ( 55 9) 292-3827 (Product specifications subject to change without notice.
An important point after buying a device Pelco WLV500-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco WLV500-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco WLV500-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco WLV500-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco WLV500-3 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco WLV500-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco WLV500-3.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco WLV500-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco WLV500-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
