Instruction/ maintenance manual of the product VSS200DT Pelco
Go to page of 8
VSS200DT Screen Splitter C627M-A (8/03) ® INST ALLA TION/OPERA TION.
2 C627M-A (8/03) GENERAL IMPORT ANT SAFEGUARDS AND WARNINGS Observe the following W ARNINGS before installing and using this product. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
C627M-A (8/03) 3 INST ALLA TION VIDEO INPUTS Each of the two camera inputs is terminated in 75 ohms inside the splitter . So, if you loop a camera video line through a monitor before routing to the splitter , be sure to set the monitor termination switch to HI-Z.
4 C627M-A (8/03) VIDEO OUTPUT This output must be terminated with a 75-ohm load. So, if you loop the output through monitors or other accessories, be sure their terminations are set to HI-Z. Only the last unit on the line should have its termination set to 75 ohms.
C627M-A (8/03) 5 OPERA TION FRONT P ANEL CONTROLS Figure 4. Front Panel Controls SETUP 1. T urn on the two cameras, the VSS200DT , and the monitor . 2. Set the select switch to CAM 1 (full screen). 3. Adjust camera 1 position and lens until the desired portion of its picture is in the correct position for the composite display .
6 C627M-A (8/03) SPECIFICA TIONS VIDEO Inputs: T wo Input Level: 0.5 Vp-p to 2.0 Vp-p Output Level: Same as input ± 0.5 dB Input/Output Impedance: 75 Ohm Channel Gain Match: ± 0.
C627M-A (8/03) 7 W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco VSS200DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco VSS200DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco VSS200DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco VSS200DT you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco VSS200DT will certainly help you make a decision on the purchase.
If you already are a holder of Pelco VSS200DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco VSS200DT.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco VSS200DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco VSS200DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
