Instruction/ maintenance manual of the product VBP3000 Pelco
Go to page of 16
VBP3000 VBP3000 VBP3000 VBP3000 VBP3000 VIDEO IN A BAG SYSTEM WITH DET ACHABLE 5" LCD TV/MONITOR AND VIDEO CASSETTE PLA YER.
A. Introduction Thank you for selecting this “Video in a Bag” System. The system's main features include two 5" Liquid Crystal Display (LCD) TV/Monitors and Video Cassette Player (VCP) (see page 4 for a detailed feature list).
INST INST INST INST INST ALL ALL ALL ALL ALL A A A A A T T T T T ION INSTRUC ION INSTRUC ION INSTRUC ION INSTRUC ION INSTRUC T T T T T IONS IONS IONS IONS IONS 2 2 2 2 2 C. Cautions and Warnings 1. Cleaning Video Head To prevent video head clogging, use only good quality VHS tapes and discard worn out tapes.
D. Feature List 1.) One Video Cassette Player with Built In VHF/UHF/CATV Tuner system 2.) Two 5" LCD Monitors with AUX Inputs 3.) One Infra Red Remote Control 4.) One Bag (for carrying the unit and accessories) 5.) One Set of Straps for Mounting 6.
2. Refer to Figure 2. For use in a vehicle, take the cigarette lighter socket adapter from the lower compartment, plug one end into the DC IN 12V jack on the rear of the unit, slide the cord through the slot in the bag, and plug the other end into the cigarette lighter socket.
Note: 1). When the monitor is connected to the main unit the unit will supply inside power to the monitor, there is no need for another power source to be connected to the DC 12V IN jack on the side of the monitor.
H. Installing the Unit with Bag Between the Driver/Passenger Seat Option 1 (Refer to Figure 7) Figure 7 1. Take one of the supplied straps and connect the latch to the upper metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the headrest of the driver's seat.
Option 2 (Refer to Figure 8) Figure 8 1. Follow the installation instructions shown in the Option 1. 2. Remove the second monitor and its pouch from the front compartment of the bag. 3. Unfastening the Velcro strap and remove the monitor from the pouch.
Option 3 (Refer to Figure 9) Figure 9 1. Follow the installation instructions shown in the Option 1. 2. Remove the additional monitor and pouch from the front compartment of the bag, make sure to feed the bottom piece of the pouch into the long slot of the Monitor and attach the Velcro strap to fasten the monitor in the pouch.
I. Installing the Unit with Bag on the Back Seat in a Car There is no need to remove the four straps from the bag as they are not used in this installation. Option 1 (Refer to Figure 10). Figure 10 Carefully place the system (back facing up) on the back seat.
3. Remove the additional monitorand pouch from the front compartment of the bag, making sure to feed the bottom piece of the pouch into the long slot of the monitor and attach the Velcro strap to fasten the monitor in the pouch.
K. Controls/Jacks/Plug/Indicator (Refer to Figure 13) Figure 13 1. Headphone Input Jack 2. 12V DC Input Jack for Monitor 3. Remote Control Sensor 4. Power LED Indicator for Monitor 5. Power Switch for Monitor 6. TV/VCP Select Switch 7. Brightness Up/Down Thumbwheel 8.
L. Remote Control (Refer to Figure 14) 1. TV Power Button 2. Number Buttons 3. Skip Search Button 4. TV/CATV Select Button 5. VCP Power Button 6. (Fast) Rewind Button 7. (Fast) Forward Button 8. TV Channel Up Button 9. TV Channel Down Button 10. Auto Memory Button 11.
14 N. Watching TV 1. Antenna a. Refer to Figure 15. Plug the dipole antenna into the reserve hole on the back of the system with its side that connects the cable facing up , you will hear a snap as it locks into place. Plug its connector into the RF IN jack.
P. Wired Headphone Optional wired headphones may be used with the "Video In a Bag" System. Simply plug in the headset to the headphone jack on the side of the monitor, and both internal speakers will be turned off.
7 7 7 7 7 7 7 7 7 7 OPER OPER OPER OPER OPER A A A A A T T T T T ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUC T T T T T IONS IONS IONS IONS IONS AUDIOVOX CORPORATION (the Company) warra.
An important point after buying a device Pelco VBP3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco VBP3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco VBP3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco VBP3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco VBP3000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco VBP3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco VBP3000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco VBP3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco VBP3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
