Instruction/ maintenance manual of the product SS4722L Pelco
Go to page of 4
® SS4718/SS4718L/SS4722/SS4722L Sun Shr oud and TI47 Thermal Insulation Installation/Operation Manual C1409M-C (7/98) 1.0 W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2 Pelco Manual C1409M-C (7/98) 3.0 INST ALLA TION 3.1 SS4718/SS4722/ The sun shroud is supplied with two (2) threaded spacers and two (2) Phillips head SS4718L/SS4722L screws. SUN SHROUDS To install the sun shroud, perform the following steps (refer to Figure 1).
Pelco Manual C1409M-C (7/98) 3 3.2.2 Body Insulation 1. Remove the long, 1.5-inch wide, strip of insulation for the side panel from the Installation lid insulation pad.
4 Pelco Manual C1409M-C (7/98) 4.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved.
An important point after buying a device Pelco SS4722L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco SS4722L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco SS4722L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco SS4722L you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco SS4722L will certainly help you make a decision on the purchase.
If you already are a holder of Pelco SS4722L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco SS4722L.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco SS4722L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco SS4722L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
