Instruction/ maintenance manual of the product SS3002 Pelco
Go to page of 16
SS30/SS3000/ SS3002 Dome Enclosures Installation/ Operation Manual C428M-B (2/98) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
2 PELCO Manual C428M-B (2/98) REVISION HISTOR Y Manual # Date Comments C428M 3/87 Original version. C428M 5/90 Rev . A. Revised Section 4.3, Connector Assembly, procedures; Section 4.5, Adjustments, for addition of fixed limit stop; and Section 6.0, Mechanical Part List.
PELCO Manual C428M-B (2/98) 3 1.0 GENERAL Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
4 PELCO Manual C428M-B (2/98) 2.0 DESCRIPTION Pelco’ s SS30/SS3000 series is a full-sphere, discreet surveillance enclosure de- signed to be suspended from a ceiling and to complement the interior decor of businesses, hotels, and offices.
PELCO Manual C428M-B (2/98) 5 3.0 INST ALLA TION Save the shipping carton and plastic packing in case the unit has to be returned for credit or repair .
6 PELCO Manual C428M-B (2/98) QTY SYMBOL DESCRIPTION P AR T NUMBER 2 C1, C2 CAP ACIT OR, 15 MFD, 100V CAPU0015.0/100N 1 M1 P AN MOTOR 2508001 2 M2 TIL T MOTOR PS78001 1 J2 CONNECT OR CONMAB6100 14 —.
PELCO Manual C428M-B (2/98) 7 Figure 2 . Connector Assembly STEPS 3-7 1 5 10 16 23 29 34 9 15 22 28 33 37 4 FRONT VIEW 37-PIN CONNECTOR 1 FRONT VIEW 3 7 11 14 15 16 10 6 2 16-PIN CONNECTOR 1 4 FRONT V.
8 PELCO Manual C428M-B (2/98) Figure 3. Mounting Configurations 3.4 MOUNTING The SS3000 enclosure is designed to be suspended from a suitable length of 1-1/2" pipe threaded at both ends. This pipe can be interfaced to either a Pelco MRW A wall adapter, MRCA ceiling adapter , or coupled to a longer length of pipe (see Figure 3).
PELCO Manual C428M-B (2/98) 9 3.4.1 Ceiling/W all Mounting 1. Select an appropriate length of 1-1/2" NPT pipe for the mount you have se- lected. Once the mount is installed, insert and tighten the pipe to approxi- mately 30 ft lb, then tighten the 8-32 screw in the pipe nut to lock the pipe threads.
10 PELCO Manual C428M-B (2/98) Figure 5. SS3000 Exploded Assembly Diagram NOTE: The “Schneider” ring is not shown in this diagram. It is de- signed to fit over the square por- tion of the upper dome (item 1). 9. T urn the system on and rotate the pan/tilt.
PELCO Manual C428M-B (2/98) 11 3.5 ADJUSTMENTS T o adjust the pan/tilt limits, perform the following steps. Refer to Figure 6 for limit stop locations. 1. Factory pan limits are set to 0-355 ° and tilt limits at ± 45 ° . Pan to the right using the joystick control until the desired RIGHT pan limit is reached.
12 PELCO Manual C428M-B (2/98) 4.0 MAINTENANCE Clean the acrylic lower dome as necessary to maintain a clear picture. Be careful not to scratch the surfaces of the dome. Exterior Surface - Clean the dome's exterior surface with a nonabrasive cleaning cloth and cleaning agent that is safe for acrylic plastic.
PELCO Manual C428M-B (2/98) 13 5.0 MECHANICAL P AR TS LIST T able A. SS3000 Exploded Assembly Diagram (Corresponds to Figure 5) Item No. Quantity Description Part Number 1 1 Dome, upper SS300010000 2 .
14 PELCO Manual C428M-B (2/98) 6.0 SPECIFICA TIONS ELECTRICAL Input voltage: 24 VAC required for pan/tilt Power Requirements Running Starting Pan: .31 amp (7.
PELCO Manual C428M-B (2/98) 15 GENERAL Construction: Upper dome: Black, U.L. 94HB rated ABS plastic Lower dome: Acrylic hemisphere with distortion free viewing window with light attenuation factor of 1 f-stop (SS30/SS3000) or mirrored lower dome with 2 f-stop (SS3002).
16 PELCO Manual C428M-B (2/98) 7.0 WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
An important point after buying a device Pelco SS3002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco SS3002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco SS3002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco SS3002 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco SS3002 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco SS3002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco SS3002.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco SS3002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco SS3002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
