Instruction/ maintenance manual of the product SS2000 Pelco
Go to page of 20
SS20, SS22, SS2000, SS2002 Series Discr eet Sur veillance Enclosures Installation/ Operation Manual C429M-B (2/98) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
2 Pelco Manual C429M-B (2/98) REVISION HISTOR Y Manual # Date Comments C429M-A 10/94 Wire colors revised on figures 2-4, 6 and 7. (Pin 8 - Figure 2; Pins 8 & 23 - Figures 3 and 4; Pins 8, 11, 12, 13 - Figures 6 and 7.) C429M-B 7/96 Revised to include new models SS22 and SS2002-SL.
Pelco Manual C429M-B (2/98) 3 1.0 GENERAL CAUTION: This device is designed to operate at 24 volts AC power . Input volt- ages must not exceed 28 volts or drop below 22 volts, or else damage the the motors will occur . Should you need technical assis- tance, please call (800) 289- 9100.
4 Pelco Manual C429M-B (2/98) 2.0 DESCRIPTION Pelco’ s SS20/SS22/SS2000/SS2002 Series domes are full-sphere, discreet sur- veillance enclosures designed to be suspended from ceilings and to compliment the interior design of businesses, hotels, and offices.
Pelco Manual C429M-B (2/98) 5 3.0 INST ALLA TION Save the shipping carton and plastic packing in case the unit has to be returned for credit or repair . 3.1 CONDUCTOR AND CABLE REQUIREMENTS A minimum of 1 1 conductors plus coax is required, which includes common re- quirements for motorized zoom lens and camera AC power .
6 Pelco Manual C429M-B (2/98) Figure 2 . SS2000/SS2000-SL/SS2002-SL W iring Diagram.
Pelco Manual C429M-B (2/98) 7 Figure 3 . SS2000-PP W iring Diagram.
8 Pelco Manual C429M-B (2/98) Figure 4 . SS2000SL-PP Wiring Diagram.
Pelco Manual C429M-B (2/98) 9 Figure 5 . Connector Assembly 3.2 CONNECTOR ASSEMBL Y T o install and test the SS2000/SS2002 Series dome you will need to assemble the connector parts provided. Fabricate the interconnecting cable as outlined below (see Figure 5): 1.
10 Pelco Manual C429M-B (2/98) 8 4 3 1 14 9 20 15 25 21 28 26 FRONT VIEW 28-PIN CONNECTOR CABLE CLAMP' CON206070-1 CABLE, 12 COND. @ 6' WIR201912 CABLE, 9 COND. @ 6' WIR220709 COAX @ 6' WIRRG174/U CONCPM88-174 28-POS RECEPTACLE CON205839-3 CRIMP SOCKET CON1-66504-0 Figure 6 .
Pelco Manual C429M-B (2/98) 11 3.3 MOUNTING The SS2000/SS2002 enclosure is designed to be suspended from a suitable length of 1-1/2" pipe threaded at both ends. This pipe can be interfaced to either a Pelco MRW A wall adapter , MRCA ceiling adapter, or coupled to a longer length of pipe.
12 Pelco Manual C429M-B (2/98) 3.4 DOME INST ALLA TION T o install your dome system, perform the following steps (refer to Figure 9): 1. Select the appropriate pipe length and mounting method. If the MRCA or MR WA mount is used, tighten the pipe to approximately 30 ft lb, then tighten the 8-32 screw in the pipe nut to lock the pipe threads.
Pelco Manual C429M-B (2/98) 13 4.0 EXPLODED ASSEMBL Y DIAGRAM T able A. SS2000/SS2002 Exploded Assembly Diagram Item Qty Description Part Number 1 1 Dome, upper SS200010000 2 1 Dome, lower, Black (Opa.
14 Pelco Manual C429M-B (2/98) Figure 9 . SS2000/SS2002 Exploded Assembly Diagram.
Pelco Manual C429M-B (2/98) 15 5.0 ADJUSTMENTS T o adjust the pan/tilt limits, perform the following steps. Refer to Figure 10 for limit stop locations. Factory pan limits are set to 0-355 ° and tilt limits are set to 0-90 ° (horizontal to vertical).
16 Pelco Manual C429M-B (2/98) 6.0 MAINTENANCE Clean the acrylic lower dome as necessary to maintain a clear picture. Be careful not to scratch the surfaces of the dome. Exterior Surface - Clean the dome's exterior surface with a nonabrasive cleaning cloth and cleaning agent that is safe for acrylic plastic.
Pelco Manual C429M-B (2/98) 17 7.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 24 VAC required for pan/tilt Running Current Pan: 0.31 amp (7.44 vA) Tilt: 0.
18 Pelco Manual C429M-B (2/98) GENERAL Maximum Camera/ Lens Length: 12.5 inches (31.75 cm) Ambient Temperature Range: 35 ° F to 120 ° F (1.6 ° C to 48.
Pelco Manual C429M-B (2/98) 19 NOTES.
20 Pelco Manual C429M-B (2/98) 8.0 WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Excep- tions to this warranty are as noted below: • Three years on Genex™ Series multiplexers.
An important point after buying a device Pelco SS2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco SS2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco SS2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco SS2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco SS2000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco SS2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco SS2000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco SS2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco SS2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
