Instruction/ maintenance manual of the product SD4N-B1 Pelco
Go to page of 28
INST ALLA TION C3446M (7/08) Spectra ® Mini IP Dome System.
2 C3446M (7/08) Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . .
C3446M (7/08) 3 List of Illustrations 1 DHCP Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 Endura Network Example . . . . . . . . . . . . . . . . . . . . . .
4 C3446M (7/08) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
C3446M (7/08) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 C3446M (7/08) Description The Spectra ® Mini IP dome system is an indoor mini do me system with a built-in 100Base-TX network interface for live streaming to a sta ndard Web browser (Microsoft ® Internet Explorer ® or Firefox ® ).
C3446M (7/08) 7 PARTS LIST The following parts are supplied with the Spectra Mini IP dome system: The following parts, in addition to the normal in stallation tools, are needed but not supplied: Qty D.
8 C3446M (7/08) BASIC SYSTEM CONFIGURATIONS The following illustrations demonstrate the possible conf igurations of Spectra Mini IP with a variety of network options. IMPORT ANT NOTE. PLEASE READ . The network implementation s in this document are shown as general representations only and are not intended to show detailed network topologies.
C3446M (7/08) 9 DHCP NETWORK In this configuration, the DHCP network is accessed throu gh the Web browser . NOTE: For a secure network, Pelco recomme nds placing the dome behind a firewall. Refer to T able A on page 8. Figure 1. DHCP Network Ex ample ENDURA NETWORK Refer to T able A on page 8.
10 C3446M (7/08) PRIVATE NETWORK When using a private network, th e PC used to operate the Web browser acts as the server . If a static IP network is being used rather than a DHCP network, t he dome system is assigned a default IP address of 192.168.0.
C3446M (7/08) 11 STATIC NETWORK When using a static network, the PC used to o perate the Web browser must use the same subnet mask as the dome systems to which it is connected. When the first dome system is plugged into the network, it is assigned a default IP address of 19 2.
12 C3446M (7/08) Cover and Back Box Installation The Spectra Mini IP is an indoor dome system desi gned for ceiling applicatio ns. The dome can be mounted to the surface of ceilings, or it can be recessed in hard ceilings or standard 2 x 2 ft (61 x 61 cm) tiles in suspended ceilings.
C3446M (7/08) 13 Figure 5. Ceiling Installatio n Figure 6. Concrete Ceil ing Installation 6-32 T oggle Bolts (not supplied) #8 x 3.50-Inch Self-T appin g Screws (supplied) NOTE: Use either toggle bolts or self-tapping screws when mounting the dome to a standard ceiling.
14 C3446M (7/08) RECESSED INSTALLATION SUSPENDED CEILING 1. Remove the spring paddle flex assembly from the surface mount ring (refer to Figure 7). Figure 7. Spring Paddle Flex Assembly 2. Remove the surfa ce mount ring from the d ome drive as follows (refer to Figure 8 on page 15): a.
C3446M (7/08) 15 9. Line up the tabs on the trim ring with the slots in the dome drive. Snap the trim ring and dome bubble into place. Figure 8. Removing the Surf ace Mount Ring Figure 9.
16 C3446M (7/08) HARD CEILING 1. Remove the spring paddle flex assembly from the surface mount ring. 2. Remove the surfa ce mount ring from the d ome drive as follows (refer to Figure 8 on page 15): a. Place fingers on the circular marks located on the sides of the surface mount ring.
C3446M (7/08) 17 Wiring T ables CAT5 CABLE Connect a Cat5 cable to the RJ-45 network connecto r . The 8-pin RJ-45 connector inclu des video and PoE for the dome system.
18 C3446M (7/08) 24 V A C CONNECTIONS (OPTIONAL) If PoE is not used, the camera includes a 24 VAC po wer connector . Connect the power cable to the 2-pin power connector on the back of the camera using t he terminal block connector (provided). Refer to Recommended Wire Gauge and Wiring Dista nces on page 1 8.
C3446M (7/08) 19 CONNECTING ALARMS The Spectra Mini IP provides an alarm input for external signaling devices, such as door contacts or motion detectors.
20 C3446M (7/08) UNSUPERVISED ALARMS When an alarm is configured as an unsupervised alarm, the dome system only trig gers an alarm when the normal alarm state (normally open or normally closed) changes. Figure 15 shows the ala rm and no alarm conditi ons of an unsupervised alarm input.
C3446M (7/08) 21 ALARM CONNECTIONS Refer to Figure 10 on page 17 for addi tional wiring information. The alarm is internally connected to th e Spectra Mini IP chassis.
22 C3446M (7/08) Reset Button Use the reset button locate d underneath the tr im ri ng on the mounting flange to access the following modes: T o access one of these modes: 1. Press and hold the reset butto n. The unit starts cycling throug h the modes; hold the b utton for four seconds to access (cycle through) each mode.
C3446M (7/08) 23 T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • C heck Cat5 cable connection. • V erify PoE is enabled. • Disconnect the network cable and then reconnect it to the dome system. Check the LED on the trim ring to verify that it is fl ashing green, indicating the dome system has power .
24 C3446M (7/08) Dome system not discovered No dome system power V erify the dome system is powered correctly with PoE or with 24 VAC. Confirm power consumption with Web interface of PoE-capable switch or through blinking green LED during dome system power -up.
C3446M (7/08) 25 Specifications MECHANICAL Pan Movement 360° continuous pan rotatio n V ertical T ilt Unobstructed +2° to -92° Manual Pan/Ti lt Speeds Pan 0.
26 C3446M (7/08) LENS Lens f/1.8 (focal length, 4.2~42 mm) Zoom 10X optical zoom, 8X digital zoom Zoom Speed (optical range) 1.5/2.5/4.3 seconds Horizontal Angle of View 46.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, witho ut charge, any mer c handise proved defective in ma terial or wo rkmanship for a period of one year after th e date of shipment.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: (800) 289-9100 Fax: (800) 289-9150 International T el: +1 (559) 292-1981 Fax: +1 (559) 348-1120 www .
An important point after buying a device Pelco SD4N-B1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco SD4N-B1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco SD4N-B1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco SD4N-B1 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco SD4N-B1 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco SD4N-B1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco SD4N-B1.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco SD4N-B1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco SD4N-B1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
