Instruction/ maintenance manual of the product RK101 Pelco
Go to page of 4
Installation/Operation RK100 and RK101 Rack Mount Kits C1967M-A (6/02) Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.pelco.
[ 2 ] Pelco Manual C1967M-A (6/02) DESCRIPTION The RK100 Rack Mount Kit provides rack mounting for the QD104 Series Quad Video Processor while the RK101 Rack Mount Kit does the same for the DX2000DH Data Hub. The RK100 and RK101 are similar except for minor differences in dimensions and the location of screw holes.
Pelco Manual C1967M-A (6/02) [ 3 ] Double Mount T o rack mount two QD104 Series Quad Video Processors or two DX2000DH Data Hubs, refer to Figure 1. (Only the quads are shown. Installation of the data hubs is similar .) Do the following: 1 Remove the front and center screws from the sides of both units’ covers.
[ 4 ] Pelco Manual C1967M-A (6/02) REVISION HISTOR Y Manual # Date Comments C1967M 3/00 Original version. C1967M-A 6/02 Revised the manual to include RK101 Rack Mount Kit information. ® Pelco, the Pelco logo, Spectra, Genex, Legacy , and Intercept are registered trademarks of Pelco.
An important point after buying a device Pelco RK101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco RK101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco RK101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco RK101 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco RK101 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco RK101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco RK101.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco RK101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco RK101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
