Instruction/ maintenance manual of the product PT780SL Pelco
Go to page of 24
PT780 Legacy ® Series Pan/Tilts Installation/ Operation Manual C342M-D (8/05) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 .
2 Pelco Manual C342M-D (8/05) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION .
Pelco Manual C342M-D (8/05) 3 LIST OF ILLUSTRA TIONS Figur e Page 1 Removing the Screws ........................................................................ 8 2 Releasing the Covers .................................................................
(This page intentionally left blank.) 4 Pelco Manual C342M-D (8/05).
Pelco Manual C342M-D (8/05) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
6 Pelco Manual C342M-D (8/05) 2.0 DESCRIPTION The PT780 Legacy ® Series pan/tilt units are designed for medium, indoor/outdoor use. Only Legacy Series enclosures can be mounted on the pan/tilt units. These enclo- sures are the EH4700L and EH5700L environmental enclosures and the EH8106L pressurized enclosure.
Pelco Manual C342M-D (8/05) 7 3.0 INST ALLA TION 3.1 MOUNTING Attach the pan/tilt unit to a wall or ceiling mount. Follow the instructions that are provided with the mount. Make sure the mounting surface and the selected mount can support four times the combined weight of the pan/tilt unit and the camera enclosure (including the camera and lens).
8 Pelco Manual C342M-D (8/05) 3.2 P AN AND TIL T LIMIT STOP ADJUSTMENTS 1. Remove the covers. a. Refer to Figure 1 and remove the Phillips screw on each side of the pan/ tilt unit. b. Refer to Figure 2 and place your hands under the cover halves. Exert a strong, upward force to release the covers from their internal latching devices.
Pelco Manual C342M-D (8/05) 9 2. Adjust the tilt limit stops. Refer to Figure 5 for the location of the tilt limit stops. The tilt limit stop closest to the front of the pan/tilt unit limits the downward movement. The tilt limit stop closest to the back of the pan/tilt unit limits the upward movement.
10 Pelco Manual C342M-D (8/05) 3.3 ENCLOSURE INST ALLA TION Attach the camera enclosure to the pan/tilt unit. Follow the instructions that are provided with the enclosure.
Pelco Manual C342M-D (8/05) 11 Refer to Figure 9 and the following steps to construct the cable: 1. Slide the unshielded and coaxial cables through the cable shell and rubber boot. 2. Strip one inch of the jacket from the cables. 3. For the unshielded conductors, strip 1/8 inch of insulation from the individual wires.
12 Pelco Manual C342M-D (8/05) Figure 10. Wiper On/Off Connection.
Pelco Manual C342M-D (8/05) 13 Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Vid.
14 Pelco Manual C342M-D (8/05) Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Vid.
Pelco Manual C342M-D (8/05) 15 T able B. Requirements to Wire Power to Pan and T ilt Motors Maximum Cable Length* Wire Size 6 Conductors** 7 Conductors*** 5 Conductors**** 120 V AC PT780P Models 20 A .
16 Pelco Manual C342M-D (8/05) T able C. Maximum Cable Distances Using RB24 or RB1 15 Relay Boxes RELA Y BOX CONTROL A B REQUIRED EXTERNAL POWER SUPPL Y Wire Size Maximum “A” Maximum “B” Dista.
Pelco Manual C342M-D (8/05) 17 T able D. Requirements to Wire Power to Camera Enclosure Option Power HB1 120 V AC (40 watts) HB2 24 V AC (40 watts) HB3 230 V AC (40 watts) T able E.
18 Pelco Manual C342M-D (8/05) T able F . 24 V AC Wiring Distances Chart Wire Gauge Maximum distance from transformer to load The following are the recommended maximum distances for 24 V AC applications and are calculated with a 10-percent voltage drop.
Pelco Manual C342M-D (8/05) 19 4.0 OPERA TION Refer to the manual for your control equipment for operating the pan/tilt unit. If your enclosure has the heater blanket option, it is thermostatically controlled to turn on at 40 ° F (4.44 ° C) and turn off at 60 ° F (15.
20 Pelco Manual C342M-D (8/05) 5.0 MAINTENANCE If you need to remove the enclosure, protect the RediLINK™ connector area against moisture, dust, dirt, etc. Failure to do so could result in a bad connection. Also, damage to the pan/tilt unit or enclosure could occur when power is turned on.
Pelco Manual C342M-D (8/05) 21 (2) Using a screwdriver , pry the motor down at H to tighten for the cor- rect chain tension. (Y ou should not be able to freely move the motor with your finger , nor should it be so tight that it will not move at all as this usually leads to binding.
22 Pelco Manual C342M-D (8/05) 6.0 SPECIFICA TIONS Specifications apply to all models unless specified otherwise. MECHANICAL Pan Rotation: Movement in horizontal plane: 0-355 ° 0-360 ° (SL models on.
Pelco Manual C342M-D (8/05) 23 Figure 12. PT780 Series Dimension Drawing 1 1.10 (28.1 9 ) .70 (1.78) PELCO 8.50 (21.5 9 ) 9 .60 (24.38) Ø 4.00 (10.16) Ø 3.50 (8.8 9 ) 1/4-20 D&T X .50 (1.27) USABLE THREAD DEPTH EQUALL Y SP ACED ON A 2.25 (5.72) B.
24 Pelco Manual C342M-D (8/05) 7.0 W ARRANTY AND RETURN INFORMA TION ® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy , and Camclosure are registered trademarks of Pelco. ™ Endura and ExSite are trademarks of Pelco. © Copyright 2005, Pelco.
An important point after buying a device Pelco PT780SL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco PT780SL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco PT780SL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco PT780SL you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco PT780SL will certainly help you make a decision on the purchase.
If you already are a holder of Pelco PT780SL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco PT780SL.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco PT780SL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco PT780SL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
