Instruction/ maintenance manual of the product PS20 Pelco
Go to page of 8
PS20 Medium-Duty Indoor/Outdoor Scanner Installation/ Operation Manual C361M-A (8/02) ® Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
2 Pelco Manual C361M-A (8/02) IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
Pelco Manual C361M-A (8/02) 3 PREP ARE MOUNTING SURF ACE 1. Determine the mounting location. Make sure the mounting surface can support four times the combined weight of the scanner and the camera and lens or enclosure, camera, and lens. Refer to the manuals for your enclosure, camera, and lens for the weights of those units.
4 Pelco Manual C361M-A (8/02) WIRING Make electrical connections as required for scanner operation. If required use the wire nuts (provided). Cable distances should not exceed the distances specified in T able A. Refer to the following wiring diagrams (Figure 3) and select the correct diagram for your installation.
Pelco Manual C361M-A (8/02) 5 MOUNTING Attach the scanner to a flat surface or compatible wall/ceiling/pedestal mount using four bolts (not provided). CAMERA/ENCLOSURE MOUNTING 1. Center (balance) the camera and lens, or enclosure, camera, and lens load on the tilt table.
6 Pelco Manual C361M-A (8/02) LIMIT STOP ADJUSTMENT To set pan limit stops, perform the following steps: 1. Loosen the right and left limit stops. 2. Operate the scanner . Pan the unit to the right until the desired right pan limit is reached. 3. Move the right limit stop to the selected position and secure in place.
Pelco Manual C361M-A (8/02) 7 SPECIFICA TIONS MECHANICAL Pan: 0-380 ° movement in horizontal plane Speed: 3 ° , 6 ° , or 12 ° per sec ± .5 ° Maximum Load: 35 lb (16 kg) centered Operation: Uprig.
8 Pelco Manual C361M-A (8/02) REVISION HISTOR Y Manual # Date Comments C361M 6/01 Original version. C361M-A 8/02 Revised installation instructions. Added certifications. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.
An important point after buying a device Pelco PS20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco PS20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco PS20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco PS20 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco PS20 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco PS20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco PS20.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco PS20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco PS20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
