Instruction/ maintenance manual of the product PMM1501-X Pelco
Go to page of 8
PMM1501 15-Inch Monochr ome Monitor Installation/ Operation Manual C933M (7/99) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100.
2 Pelco Manual C933M (7/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION .......................................................................................
Pelco Manual C933M (7/99) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Observe the following warnings before installing and using this product. 1. Installation and servicing should be done by qualified installation and service personnel only .
4 Pelco Manual C933M (7/99) CONNECTIONS SINGLE-MONITOR INST ALLA TION Refer to Figure 1 and T able A for the following instructions. 1. Set the impedance switch on the back of the monitor to 75 ohms. 2. Connect a 75-ohm video cable from the video source, such as a camera, to the BNC connector labeled IN on the back of the monitor .
Pelco Manual C933M (7/99) 5 FROM OUTPUT TO INPUT FROM OUTPUT TO INPUT FROM VIDEO SOURCE T O INPUT REAR P ANEL OF MONIT OR 3 IMPEDANCE 75 Ω HI IN OUT FUSE NOTE: SET IMPEDANCE SWITCHES AS APPROPRIA TE.
6 Pelco Manual C933M (7/99) Contrast Control - This control adjusts the contrast between the black and white portions of the picture. When properly adjusted, you will be able to observe a fine gradation between blacks, grays, and whites. Ve r tical Hold Control - This control permits adjustment of vertical stability .
Pelco Manual C933M (7/99) 7 SPECIFICA TIONS ELECTRICAL Input Voltage: PMM1501 120 VAC, 60 Hz PMM1501-X 230 VAC, 50 Hz Power Consumption: PMM1501 PMM1501-X 48 W Input Signal: 0.
8 Pelco Manual C933M (7/99) REVISION HISTOR Y Manual # Date Comments C933M 2/97 Original version. 7/99 Revised Figures 1 and 2 to show external fuse. Updated to new format. Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.
An important point after buying a device Pelco PMM1501-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco PMM1501-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco PMM1501-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco PMM1501-X you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco PMM1501-X will certainly help you make a decision on the purchase.
If you already are a holder of Pelco PMM1501-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco PMM1501-X.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco PMM1501-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco PMM1501-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
