Instruction/ maintenance manual of the product PMCS19A Pelco
Go to page of 8
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel +1 (559) 292-1981 or FAX +1 .
[ 2 ] Pelco Manual C1991M-C (9/04) 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
Pelco Manual C1991M-C (9/04) [ 3 ] REGULA TORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation.
[ 4 ] Pelco Manual C1991M-C (9/04) INST ALLA TION The monitor may be placed on any flat surface (desk or table) or rack-mounted. T o rack-mount the monitor follow the instructions supplied with the rack mount kit. V ideo and Power Connections 1. Video Cable Connection (Refer to T able A for video coaxial cable requirements.
Pelco Manual C1991M-C (9/04) [ 5 ] Figure 2. Looping Operation - One Monitor with External Video Equipment Figure 3. Looping Operation - Maximum of Three Monitors with External Video Equipment V2-H V2.
[ 6 ] Pelco Manual C1991M-C (9/04) OPERA TION 1. Set the video format switch located on the front panel to one of the following settings: VIDEO1 - Composite video (NTSC/P AL) mode VIDEO2 - Composite video (NTSC/P AL) mode for two, video input operation S-VIDEO - S-VHS mode if the S-VHS input jack on the back of the monitor is used 2.
Pelco Manual C1991M-C (9/04) [ 7 ] (Design and product specifications subject to change without notice.) SPECIFICA TIONS ELECTRICAL Input V oltage 90-260 V AC, 50/60 Hz, autoranging Power Consumption .
REVISION HISTORY Manual # Date Comments C1991M 1 1/00 Original version. C1991M-A 01/01 Added ETL and cETL certifications. C1991M-B 2/01 Added information on model PMCS19A. C1991M-C 9/04 Added information on model PMCS15A. Deleted model PMCS14A. Revised unit weights.
An important point after buying a device Pelco PMCS19A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco PMCS19A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco PMCS19A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco PMCS19A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco PMCS19A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco PMCS19A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco PMCS19A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco PMCS19A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco PMCS19A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
