Instruction/ maintenance manual of the product NVR5000PS Pelco
Go to page of 4
C1656M-A (2/06) Endura ™ NVR5000PS Replacement Power Supply This document describes how to replace a failed power supply in any of the following: • NVR5100 Series network video recorder • SEB510.
5. Gently pull the failed power supply completely out of the unit. Figure 2. Removing the Power Supply 6. Orient the replacement power supply so that the cord receptacle is at the bottom of the unit. Figure 3. Aligning the Power Supply 7. Gently push the replacement power supply into the unit until it locks into place.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco NVR5000PS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco NVR5000PS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco NVR5000PS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco NVR5000PS you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco NVR5000PS will certainly help you make a decision on the purchase.
If you already are a holder of Pelco NVR5000PS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco NVR5000PS.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco NVR5000PS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco NVR5000PS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
