Instruction/ maintenance manual of the product MR5000L Pelco
Go to page of 8
MR5000L Ceiling Monitor Mount for the MR5000 Series Public V iewing System Installation/ Operation Manual C221M-C (6/03) ® Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
2 Pelco Manual C221M-C (6/03) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Pelco Manual C221M-C (6/03) 3 IMPORT ANT Refer to the following chart for recommended mounts, installation surfaces, and minimal hardware requirements.
4 Pelco Manual C221M-C (6/03) INST ALLA TION The following parts are supplied: 1 Mount arm 1 Rack base 2 Rack sides 11 1/2-inch NPT pipe 6 #8 x .50-inch, Phillips, pan head screws and finishing washer.
Pelco Manual C221M-C (6/03) 5 Install Mount Arm a. Install the MRW A wall mount (not supplied) or MRCA ceiling mount (not supplied). For installation surfaces and minimal hardware requirements, refer to page 2 of this manual. b. Apply anti-seize to the threads of the 1 1/2-inch NPT pipe (provided).
6 Pelco Manual C221M-C (6/03) Install MR5000 Series Accessories PCM5000 Light-Duty Camera Mount Assembly a. The PCM5000 camera mount assembly can be installed on the top or bottom of the MR5000M mount arm. T o install the camera assembly onto the MR5000 Series mount, refer to Figure 4 and do the following: 1.
Pelco Manual C221M-C (6/03) 7 Prepar e Monitor for Installation Refer to Figure 6 and remove the monitor ’s back feet and side screws. SECURE BOTH SIDES OF MONITOR WITH HARDW ARE SECURE BOTH SIDES OF MONITOR WITH HARDW ARE FRONT FEET OF MONITOR NOTE: THE POSITION OF THE FRONT FEET AND BACK FEET MOUNT HOLES WILL V ARY WITH MONITOR MODEL.
8 Pelco Manual C221M-C (6/03) Connect Video and Power to Monitor a. Connect the video cable to the BNC video input on the rear panel of the monitor . b. Plug the power cable into the AC INLET connection on the rear panel of the monitor . Refer to the manual supplied with the monitor for operating instructions.
An important point after buying a device Pelco MR5000L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MR5000L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MR5000L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MR5000L you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MR5000L will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MR5000L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MR5000L.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MR5000L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MR5000L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
