Instruction/ maintenance manual of the product MPT9000PZ Pelco
Go to page of 32
® MPT9000CZ/ MPT9000PZ T ransmitter/ Contr ol (Coaxitron ® System 2000) Installation/ Operation Manual C550M-E (8/97) Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.
TABLE OF CONTENTS Section Page 1.0 WARNING .......................................................................................................................................... 1 2.0 SCOPE .........................................................
LIST OF ILLUSTRATIONS Figure Page 1 Coaxitron System 2000 Receiver ................................................................................................ ... 3 2 24 VAC Input Wiring Schematic .................................................
REVISION HISTORY Manual # Date Comments C550M — Original version. C550M 8/89 Rev. A. Manual revised to new format. C550M 9/90 Rev. B. Manual revised to include 230 VAC, 12 V and preset (PP) models. Sections 2.1-2.3, 4.1.1, 4.2 and 5.5- 5.6 revised. C550M 5/91 Rev.
Pelco Manual C550M-E (8/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 4. Only use replacement parts recommended by Pelco.
2 Pelco Manual C550M-E (8/97) NOTE: This manual applies to those Coaxitron systems using either PCB1500529 REV J or PCB1500529 REV K boards. PCB board draw- ings were done from the REV J board perspective; however, differences between the two boards that affect function or operation are clearly pointed out.
Pelco Manual C550M-E (8/97) 3 Figure 1. Coaxitron System 2000 Receiver Figure 2. 24 VAC Input Wiring Schematic T1 T2 T3 POWER INPUT PC BOARD SCREWS SCREWS AMP CONNECTOR 37-PIN Remove PC board mounting screws and remove the PC board. If necessary, tag and remove the PC board.
4 Pelco Manual C550M-E (8/97) Figure 3. AC Input and Fuse Values shown in the "Short" position 37-PIN AMP CONNECTOR POWER INPUT PC BOARD 1. AC HIGH 2.
Pelco Manual C550M-E (8/97) 5 4. The contact pins supplied with the mating con- nector are the “crimp” type which may also be soldered if you so desired (item 4). 5. After crimping or soldering the contact pins to the conductors, push them into the proper holes in the connector until they snap in place.
6 Pelco Manual C550M-E (8/97) Figure 5. Receiver Control Output/Input Pin Assignments shown in the "Short" position 37-PIN AMP CONNECTOR POWER INPUT PC BOARD SW 1 P2 P1 BNC CONNECTORS COAXIT.
Pelco Manual C550M-E (8/97) 7 Figure 7. Coaxitron System 2000 with Manual Video Switcher and Multiple Cameras Figure 6. Basic Coaxitron System 2000 4.3 SYSTEM CONFIGURATIONS Figure 6 shows the simplest system configuration utiliz- ing the Coaxitron System 2000.
8 Pelco Manual C550M-E (8/97) A more complex system is shown in Figure 8. Here, several control locations can serve a single camera system. Note : All transmitters, except the last one, must be looping (unterminated) rather than terminating.
Pelco Manual C550M-E (8/97) 9 Figure 9. Coaxitron System 2000 with Multiple Transmitters and Receivers Figure 10. Coaxitron System 2000 Basic Interconnect Diagram AC INPUT F1 .
10 Pelco Manual C550M-E (8/97) 5.0 OPERATION In general, all operating controls on the transmitter are self explanatory. With the exception of the ON/OFF power switch and the 8-position joystick, all controls are center-off, spring return paddle switches (momen- tary on-off-on).
Pelco Manual C550M-E (8/97) 11 As an example, assume that the operator switches to manual iris control and proceeds to open the iris exces- sively. The result can be a complete loss of control. Within 20 to 40 seconds, camera power is automatically removed (assuming this feature exists) and auto iris is reinstated.
12 Pelco Manual C550M-E (8/97) • Receiver Control Output for 12 VDC Camera Option The usual output for camera power is 24 VAC accessed at pins 9 and 14 of the 37-pin AMP connector (see Fig. 5) where CAM AC HIGH and AC LOW emerge as CAMERA INPUT POWER.
Pelco Manual C550M-E (8/97) 13 Up to 32 presets can be stored in each receiver. Up to 8 presets can be activated by alarm contacts connected to the receiver. There is also an open collector output from the receiver to activate an external device (such as the CSA764) when the alarm contacts are activated.
14 Pelco Manual C550M-E (8/97) SB1900-PP , SB1900SL-PP , SS2000-PP and SS2000SL-PP 37-pin Connector Function Function 37-pin Connector 28-pin Connector Function 1 Pan/T ilt Common 1 Pan/T ilt Common 1.
Pelco Manual C550M-E (8/97) 15 37-pin Connector Function Function 37-pin Connector 28-pin Connector Function 1 Pan/T ilt Common 1 Pan/T ilt Common 1 Pan/T ilt Common 2 Manual Iris 2 Preset Pan 2 Video.
16 Pelco Manual C550M-E (8/97) Preposition Lenses 37-pin 9-pin Connector Function Connector Function 1 Pan/Tilt Common 1 Iris 2 Manual Iris 2 Zoom 3 Pan Left 3 Focus 4 Video Shield 4 Lens Common 5 Til.
Pelco Manual C550M-E (8/97) 17 5.6 AUXILIARY FUNCTIONS The Coaxitron receiver is capable of operating up to four (4) remotely activated auxiliary functions. Each auxiliary output may be individually converted at the receiver for momentary or latching operation.
18 Pelco Manual C550M-E (8/97) Figure 16. External Device Wiring Diagram 1 2 3 8 MANUAL IRIS GROUND CONNECT TO NEGATIVE SIDE OF 12 VDC SUPPLY NOTE: CUSTOMER SUPPLIES PARTS AND 12 VDC POWER SUPPLY + 12.
Pelco Manual C550M-E (8/97) 19 Figure 17. Auxiliary Functions Wiring Diagram 30 34 33 32 36 RECEIVER/DRIVER 37-PIN CONNECTOR AUXILIARY FUNCTIONS TYPICAL WIRING CONNECTIONS 10 VDC RELAY 25 mA COIL CURR.
20 Pelco Manual C550M-E (8/97) Figure 18. AI700/AI701 Wiring Diagram 1 2 3 10 11 12 13 MANUAL IRIS COAXITRON RECEIVER 37 PIN CONNECTOR IRIS FOCUS ZOOM LENS COMMON 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4.
Pelco Manual C550M-E (8/97) 21 Figure 19. Coaxitron Receiver Assembly Layout (Top View) 5.7 AUTO/RANDOM OPERATION The A9000 Auto/Random Scan module is a plug-in P.
22 Pelco Manual C550M-E (8/97) Figure 20. A9000 Wiring Schematic U1 1N914 1 2 8 3 R1 100K +10 GND ACTIVE 14 15 U1 CD4049 U1 U1 U1 U1 R2 820 LED 1 12 10 6 4 11 9 7 5 AUTO SCAN CAM ON AUX 4 AUTO IRIS AU.
Pelco Manual C550M-E (8/97) 23 Figure 21. CX900TLC Test Module and Wiring Schematic 6.0 TROUBLESHOOTING GUIDELINES If you experience operating problems with either the receiver or transmitter, first check all fuses and voltage readings to make sure they are in working order.
24 Pelco Manual C550M-E (8/97) 8.0 MODEL NUMBER TRANSMITTER WEATHER-PROOF? INDOOR USE? 24VAC PAN/TILT? 120VAC PAN/TILT? 230VAC PAN/TILT? Receiver in weatherproof box, 120VAC power input, 24VAC pan/tilts with power supply for pan/tilt, zoom lens, and 4 accessory functions (3 latching, 1 momentary).
Pelco Manual C550M-E (8/97) 25 8.1 OPTIONAL ACCESSORIES A9000 Auto/random scan, plug-in mod- ule. AUX2000 Auxiliary function relay box for control of wiper/washer functions. AUX9000 Auxiliary function wiring harness. Required for use with AUX2000 and all indoor Coaxitron/Wiretron receivers (supplied with outdoor receivers).
26 Pelco Manual C550M-E (8/97) Input Video Level: 1V p-p nominal; 2V p-p maxi- mum at less than 75% APL; 1.5V p-p maximum at 90% APL System Bandwidth: Less than 2 dB down at 10 MHz (exclusive of cable.
Pelco Manual C550M-E (8/97) 27 NOTES:.
28 Pelco Manual C550M-E (8/97) 10.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
An important point after buying a device Pelco MPT9000PZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MPT9000PZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MPT9000PZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MPT9000PZ you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MPT9000PZ will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MPT9000PZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MPT9000PZ.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MPT9000PZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MPT9000PZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
