Instruction/ maintenance manual of the product MPT220DT Pelco
Go to page of 8
® 1.0 W ARNINGS Prior to installation and use of this product, the follow- ing W ARNINGS should be observed. 1. Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2 Pelco Manual C520M Rev B (6/92) Random scan is an effective deterrent to would-be in- truders because it follows no predictable pattern. The scan direction varies randomly as does the scanning time and dwell time (4-60 seconds). Random scan makes it impossible for intruders to “beat the system” because it has none.
Pelco Manual C520M Rev B (6/92) 3 4.0 INST ALLA TION 4.1 CONNECTOR ASSEMBL Y Installation and/or testing will require you to assemble the connector parts provided. Fabricate the intercon- necting cable according to the following steps (refer- ence Figure 1).
4 Pelco Manual C520M Rev B (6/92) Figure 2. Wiring Diagram FRONT VIEW CONTROL 14-PIN PLUG 9-PIN PLUG FRONT VIEW 1 3 5 6 7 8 9 1 3 5 6 7.
Pelco Manual C520M Rev B (6/92) 5 5.0 OPERA TION AND SYSTEM TEST 5.1 MANUAL OPERA TION TEST After installing the interconnecting cable between the pan/tilt and control, plug the control into the AC outlet, turn control on, and test operation using the following procedures: 1.
6 Pelco Manual C520M Rev B (6/92) 6.0 MAINTENANCE Under normal operating conditions and usage, mainte- nance of this equipment is not necessary . However , if maintenance is required, contact a Qualified Service T echnician or return to the factory for repair .
Pelco Manual C520M Rev B (6/92) 7 Figure 3. Dimension Drawing GENERAL Construction: Cover Steel, black polyester powder coat Chassis Steel, zinc plated Panel Aluminum, black polyester powder coat and white silkscreen Dimensions: See Figure 3 Weight: MPT24DT/MPTA24DT 5 lbs (2.
8 Pelco Manual C520M Rev B (6/92) 8.0 W ARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
An important point after buying a device Pelco MPT220DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MPT220DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MPT220DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MPT220DT you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MPT220DT will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MPT220DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MPT220DT.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MPT220DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MPT220DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
