Instruction/ maintenance manual of the product MLZA6DT Pelco
Go to page of 12
MLZA6DT Motorized Zoom Lens Contr ol Installation/Operation Manual C518M Rev B (4/91) ® Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.
ii Pelco Manual C518M Rev B (4/91) T ABLE OF CONTENTS Section Page 1.0 W ARNINGS ........................................................................................................................................ 1 2.0 SCOPE .....................
Pelco Manual C518M Rev B (4/91) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 4 . Only use replacement parts recommended by Pelco.
2 Pelco Manual C518M Rev B (4/91) 2.0 SCOPE The information contained within this manual covers the MLZA6DT Motorized Zoom Lens Control. 3.0 DESCRIPTION The MLZA6DT is a desktop zoom lens control with auto/manual iris control designed for use with all Pelco motorized zoom lenses with “ND” or “MS” in the model number .
Pelco Manual C518M Rev B (4/91) 3 4.0 INST ALLA TION 4.1 CONNECTOR ASSEMBL Y Installation and/or testing will require you to assemble the connector parts provided. Fabricate the intercon- necting cable according to the following steps (refer- ence Figure 1).
4 Pelco Manual C518M Rev B (4/91) Figure 2. Wiring Diagram for Output Pin Assignments *GROUND WIRE IS SOLDERED T O CONNECT OR HOUSING. CONTROL OUTPUT (CONA14P) P3 LENS INPUT (CONA5M) IRIS LENS COM ZOO.
Pelco Manual C518M Rev B (4/91) 5 4.2 R300 RACK MOUNT KIT INST ALLA TION The R300 Rack Mount Kit holds up to three control modules. Blank filler panels are provided for less than three modules. T o convert desk top units, perform the following steps (refer to Figure 3): 1.
6 Pelco Manual C518M Rev B (4/91) 5.0 OPERA TION AND SYSTEM TEST 5.1 SYSTEM TEST FOR MLZA6DT 1. Hook up the cable between the output connector on the MLZA6DT and the input connector on the lens (see Figure 4). 2. Connect the video cable from the camera to the VIDEO LOOP-THRU on the rear panel and to the monitor (see Figure 4).
Pelco Manual C518M Rev B (4/91) 7 6.0 MAINTENANCE Under normal operating conditions and usage, mainte- nance of this equipment is not necessary . However , if maintenance should be required, consult Pelco or a qualified service technician.
8 Pelco Manual C518M Rev B (4/91) 7.0 SCHEMA TIC Figure 5. MLZA6DT Schematic BLK BLU BLU BLK VIDEO LOOP-THRU 1 2 R2 C8 .05 1.5K 500V R1 15M C13 .01MF CR7 CR8 R22 15M R3 2.7M R4 430 Q3 2N5457 R23 3.9K VIDEO AMP B- B+ B- B+ R25 1.2K Q5 MPC 6527 R26 330K Q6 2N2907 R28 4.
Pelco Manual C518M Rev B (4/91) 9 8.0 SPECIFICA TIONS CONTROLS Zoom: Paddle switch TELE/WIDE Focus: Paddle switch NEAR/FAR Manual Iris: Paddle switch OPEN/CLOSE Auto-Iris: Paddle switch AUTO/MANUAL Sp.
10 Pelco Manual C518M Rev B (4/91) 9.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
An important point after buying a device Pelco MLZA6DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MLZA6DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MLZA6DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MLZA6DT you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MLZA6DT will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MLZA6DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MLZA6DT.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MLZA6DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MLZA6DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
