Instruction/ maintenance manual of the product MCC5600 Pelco
Go to page of 12
MCC5600 Series CCD Monochr ome Camera Installation/ Operation Manual C1926M (3/99) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.
2 Pelco Manual C1926M (3/99) LIST OF ILLUSTRA TIONS Figur e Page 1 Location of Parts and Controls (Front and Rear) ............................................... 4 2 Camera Mounting Screw ..............................................................
Pelco Manual C1926M (3/99) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser ved. 1. Installation and servicing should only be done by qualified service and installation personnel.
4 Pelco Manual C1926M (3/99) LOCA TION OF P ARTS AND CONTROLS Figure 1. Location of Parts and Controls (Front and Rear) BACK-FOCUS LOCKING RING CS-MOUNT RING 1/3-INCH CCD ELEMENT IRIS CONNECT OR POWER.
Pelco Manual C1926M (3/99) 5 Figure 3. CA1750 Mount Adapter Figure 2. Camera Mounting Screw 7 in. (ASA standard) -inch UNC (20 pitch) INST ALLA TION CAMERA MOUNTING Mount the camera using a 1/4–20 mounting screw that does not exceed .197" (4.5 mm ± .
6 Pelco Manual C1926M (3/99) T able A. Video Coaxial Cable Requirements Cable T ype* Maximum Distance RG59/U 750 ft (229m) RG6/U 1,000 ft (305m) RG1 1/U 1,500 ft (457m) * Minimum cable requirements: 7.
Pelco Manual C1926M (3/99) 7 LENS INST ALLA TION GENERAL LENS INFORMA TION MCC5600 Series cameras are factory adjusted to the CS-mount standard. Fixed iris, manual iris, or passive (DC controlled) auto-iris lenses may be used.
8 Pelco Manual C1926M (3/99) LENS MOUNTING Do not release the back-focus locking ring unnecessarily . Back-focus adjustment has been set at the factory to the standard CS-mount back-focus distance. T o mount a lens: 1. Remove the black protection cover from the CS-mounting ring.
Pelco Manual C1926M (3/99) 9 b. Adjust the lens and the CS-mount ring together until picture is sharpest. c. Hold the lens and CS-mount ring in place and turn the back-focus locking ring clockwise to tighten.
10 Pelco Manual C1926M (3/99) 2. Select a second camera that is out of synchronization with the first camera. 3. Adjust V -phase using a small Phillips screwdriver . 4. Switch the cameras back and forth, observing the “roll” between the cameras when they are switched.
Pelco Manual C1926M (3/99) 11 SPECIFICA TIONS CCD Sensor: 1/3-inch interline transfer Pixels EIA: 768 H x 492 V CCIR: 768 H x 582 V Sensing Area: 3/16 x 1/8 in.
12 Pelco Manual C1926M (3/99) REVISION HISTOR Y Manual # Date Comments C1926M 1/98 Original version. 3/99 Added MCC5601-2 model. Revised manual format. P elco, the P elco logo, Camclosure, Esprit, Gene x, Legacy , and Spectra are registered trademarks of Pelco .
An important point after buying a device Pelco MCC5600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MCC5600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MCC5600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MCC5600 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MCC5600 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MCC5600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MCC5600.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MCC5600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MCC5600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
