Instruction/ maintenance manual of the product MCC2400 Pelco
Go to page of 2
CCC2400/MCC2400 SERIES COMP ACT CAMERAS INST ALLA TI ON /O PE RA TION IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of the product, the following WARNINGS should be observed. 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
2. Mount the camera. There are two 1/4-20 UNC mounting points, one on the top of the case and one on the bottom of the case. 3. Connect power to the terminals on the back of the camera. The terminals will accept a Class 2 isolated power supply of 12 VDC +15%, -10% (10.
An important point after buying a device Pelco MCC2400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MCC2400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MCC2400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MCC2400 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MCC2400 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MCC2400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MCC2400.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MCC2400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MCC2400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
