Instruction/ maintenance manual of the product MC5720 Pelco
Go to page of 12
MC3820/MC5720 Series Monochrome Cameras Installation/ Operation Manual C1934M (8/99) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
Page 2 MC3820 and MC5720 Cameras Installation Instructions INTRODUCTION These instructions cover Pelcos MC3820 and MC5720 Series cameras. Read all of these instructions. Use them to install your camera and have them available for its lifetime. Refer to T able A for the camera models and their features.
Page 3 Installation Instructions MC3820 and MC5720 Cameras PRODUCT SAFETY Ensure installation and servicing is carried out by qualified personnel. Isolate from the supply circuit before any servicing. Installation method and materials must be capable of supporting four times the total weight of the unit.
Page 4 MC3820 and MC5720 Cameras Installation Instructions CAUTIONS CAUTION In order to avoid damaging your camera, note the following points. 1) The camera has threaded mounting points on the top and bottom of the case. Only use a standard, photographic mounting bolt with a 1/4-20 UNC thread.
Page 5 Installation Instructions MC3820 and MC5720 Cameras CONTROLS A N D SWITCHES On the side of the camera is a hinged flap. The hinged flap covers various adjustment controls and function switches.
Page 6 MC3820 and MC5720 Cameras Installation Instructions CONTROLS A ND SWITCHES (4) Electronic Iris (EI) The Electronic Iris (EI) compensates for excessive light level by automatically adjusting the shutter speed. The electronic iris should be ON when using fixed or manual iris lenses.
Page 7 Installation Instructions MC3820 and MC5720 Cameras CONTROLS A N D SWITCHES (9b) Supply V oltage Power Cord (MC3820-3 and MC5720-3) The non-detachable power supply cord must be connected to a power supply of 230 V AC +10% / -15% at 50 Hz.
Page 8 MC3820 and MC5720 Cameras Installation Instructions LENS SELECTION Suitable lens types are C and CS mount in fixed iris, manual iris, auto-iris or direct drive versions.
Page 9 Installation Instructions MC3820 and MC5720 Cameras FOCUS ADJUSTMENT Zoom Lenses Set the lens focus to infinity and fully open the iris by covering the lens with a suitable neutral density (ND) filter . Zoom out to the widest field of vision and view a distant object.
Page 10 MC3820 and MC5720 Cameras Installation Instructions.
Page 11 Installation Instructions MC3820 and MC5720 Cameras.
REVISION HISTORY Manual # Date Comments C1934M 8/99 Original version 8/99 AC supply voltage changed from 12-30 V AC to 14-30 V AC ® Pelco and the Pelco logo are registered trademarks of Pelco © Copyright 1999, Pelco.
An important point after buying a device Pelco MC5720 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MC5720 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MC5720 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MC5720 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MC5720 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MC5720, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MC5720.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MC5720. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MC5720 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
